• 12301 Rear Control Arm Bushings
  • 12301 Rear Control Arm Bushings

Rear Control Arm Bushings

Manufacturer: Prothane
Part Number: 12301

Options


Black
Red (Accept Special Order)
Price: $172.77

Free Shipping! In Stock Ships Immediately


Details
Polyurethane Rear Control Arm Bushings
Prothane's Control Arm Bushings provide excellent handling by reducing flexing common in rubber bushings.

Mx5 Miata | Rear Control Arm Bushing Replacement Kit

One Kit Covers Left and Right Side
Polyurethane Rear Control Arm Bushings
  • Increase Handling
  • Maintain Alignment
  • Lifetime Warranty
Footnotes
  • One Set Will Cover the Left and Right Side
FitmentRear Control Arm Bushings 12301 fits these vehicles:
  • 8 of Upper Control Arm Bushings - 64409
  • 4 of Lower Outside Control Arm Bushings - 64410
  • 8 of Lower Inside Control Arm Bushings - 64411
  • 4 of Hub to Upper Control Arm Bushings - 64412
  • 4 of Lower Outer Control Arm Bushings - 64413
  • 4 of Metal Sleeves - 60752 (.875 x .562 x 2.270 inches)
  • 4 of Metal Sleeves - 60702 (.875 x .500 x 2.750 inches)
  • 4 of Metal Sleeves - 60779 (.875 x .406 x 2.200 inches)
  • 2 of Metal Sleeves - 60780 (.750 x .406 x 2.200 inches)
  • 2 of Metal Washers - 62 (2.000 x .500 x .120 inches)
  • 2 of Metal Washers - 1178 (2.500 x .625 x .180 inches)
  • 4 of Prothane High Tech Grease - 191750-001
  • Lifetime Warranty. Prothane guarantees all Prothane Suspension Parts to be free of defects in materials and workmanship (not due to abuse, neglect or misapplication) for the total time the vehicle remains with the original purchaser of the product(s). Should the products fail to meet these conditions, Prothane will replace the product, free of charge. This excludes any and all related labor charges. The product must be shipped to Prothane (postage prepaid) along with a copy of the original receipt."
  • Cross Reference from 12301 to 11.3106Energy Suspension 11.3106
    Polyurethane.
    Price: $124.85
    Warranty: 2 Year Warranty


Prothane Control Arm Bushings

A control arm bushing plays a vital role in a suspension. Replace those faulty O.E. rubber bushings with Prothane's polyurethane control arm bushings. These polyurethane bushing provide the longevity and performance needed to maximize a suspension's efficiency.

Prothane's polyurethane is a firmer bushing than the O.E. Not only does this increase the longevity of the bushing, but gives the suspension a boost in handling performance. With a firmer bushing there will be a slight increase in NVH (noise, vibration and harshness), but most drivers prefer the boost in performance in spite of that.

Prothane Control Arm Bushings Box

Worn Rubber Bushing

The Faulty O.E.

As your suspension travels, a rubber control arm bushing is repeatedly stretching and flexing. After a while, the center sleeve begins to sag and your suspension alignment is throw out of whack. The sagging will go on until the rubber fails completely.


Use Prothane's Super Grease

Control arm bushings are a high stress part, so be sure to use the supplied Prothane's Super Grease to lubricate the bushings during installation. Its super important that you lubricate each bushing well to prevent any squeaking. If you'd like some extra grease just in case, pick up an extra 3 pack.

Prothane Control Arm Grease