• 181116 Rear Sway Bar and Endlink Bushings- 19mm (0.74 inch)
  • 181116 Rear Sway Bar and Endlink Bushings- 19mm (0.74 inch)

Rear Sway Bar and Endlink Bushings- 19mm (0.74 inch)

Manufacturer: Prothane
Part Number: 181116
Rating 10


Price: $14.97

In Stock Ships Immediately


Rear Sway Bar-Endlink Bushings - 19 mm | 4Runner

One Kit Covers Left and Right Side-Only Fits 19mm Size Bar
FitmentRear Sway Bar and Endlink Bushings- 19mm (0.74 inch) 181116 fits these vehicles:
  • 4 of Grommets End Link Bushings - 60352
  • 2 of Rear Sway Bar Brackets - 10050
  • 2 of Rear Sway Bar Bushings (19mm) - 60219
  • 4 of Dished Washers - 1130
  • Suggested part for 181116: DLL120-RearDLL120-Rear Rear Sway Bar Lateral Locks - 19-20mm
    DST Silver Color - Limited Lifetime Warranty

  • Suggested part for 181116: KLL120KLL120 Sway Bar Lateral Locks - 19-20mm
    Whiteline Gold Color Plated - 3 Year Warranty

  • Suggested part for 181116: 191750191750 Super Grease 3 Pack
    Prothane provides grease to install these parts, but you can never have too much. Grab an extra 3-pack of grease so you can more liberally apply grease when installing.

  • Lifetime Warranty. Prothane guarantees all Prothane Suspension Parts to be free of defects in materials and workmanship (not due to abuse, neglect or misapplication) for the total time the vehicle remains with the original purchaser of the product(s). Should the products fail to meet these conditions, Prothane will replace the product, free of charge. This excludes any and all related labor charges. The product must be shipped to Prothane (postage prepaid) along with a copy of the original receipt."

Prothane Sway Bar Bushings

A sway bar bushing plays a huge role in your suspension, so don't settle for rubber. Prothane Sway Bar bushings are made of polyurethane, a much more durable material for suspension bushings than rubber. Polyurethane does not break down due to road grime, weather or oils the way the rubber can. Have the peace of mind knowing you have a long lasting part on your sway bar with Prothane's sway bar bushings. Prothane's polyurethane sway bar bushings provide a secure grip on the sway bar and does not warp over time. With this snug grip, your vehicle will see a performance boost similar to installing a larger sway bar.

Prothane Bushing Box

Faulty Rubber

Faulty Rubber

A sway bar's function is to maintain the maximum amount of road contact during tires. The sway bar is held to the frame of the vehicle with a sway bar bushing. Original Equipment rubber can warp and/or crack, losing its grip on the bar. This causes the your sway bar to lose it's effectiveness. Just look at the old rubber sway bar bushing to the left. Imagine how good of a grip that thing could keep on a sway bar. Go with Polyurethane.

Use Prothane's Super Grease

The metal sway bar rotates inside the sway bar bushings, so be sure to use the supplied Prothane's Super Grease to lubricate the bushings during installation. Its super important that you lubricate each bushing well to prevent any squeaking. If you'd like some extra grease just in case, pick up an extra 3 pack.

Prothane Control Arm Grease
Prothane 181116

Product Reviews for Rear Sway Bar Bushings 181116

Prothane 181116

5 out of 5 based on 10 user reviews. Write a Review

The parts are well made, in-spec relative to the originals, and easy to install. The hardware appears coated to prevent rust but Im spraying them w/ a clear laquer from a rattle can to ensure they remain rust-free.
5 out of 5 - Parts are very nice, good material, and easy to install if you dont have a bad back.
Stephen Eason - . Prothane 181116
Great product
5 out of 5 - Quality
Richard Marin - . Prothane 181116
working as expected.
5 out of 5 - Review 1 Year Later
Raul A Vega - . Prothane 181116
The rear sway bar bushings, brackets, and attaching hardware fit perfectly and have performed flawlessly since installation five months ago. \n\nI did not use the end link bushings since I replaced both endlinks and the kits contained all bushings needed for that job. I am very pleased with the endlinks I purchased, too.\n\nI was so pleased with the quality and performance of these parts (not to mention the prompt delivery), I ordered the same parts for the front end, which are now installed and working flawlessly. \n\nSuspension.com is now my go to source for suspension parts, and I have high confidence in Prothane quality.
5 out of 5 - Good parts=good job
Duncan Hopkins - . Prothane 181116
Great kit that is noticeable to the control of the vehicle. Fast shipping helps too. Thanks!!
5 out of 5 - Excellent Quailty!
Virgil - . Prothane 181116
I am very pleased with the sway bar bushings. The shipping was very prompt and arrived with all the necessary parts. The bushings fit perfect and provided a much improved ride from my stock bushings. It was nice to have new washers for the endlinks as well. I highly recommend using this product!
5 out of 5 - Great product and service.
Robert Condon - . Prothane 181116
Installed on my 2000 4Runner and fit great!
5 out of 5
Marc Cerri - . Prothane 181116
First thank you for having these part available. My truck runs smoother then ever .....
5 out of 5 - Performs great
manuel a repollet - . Prothane 181116
Installation was easy and took less than half-hour. Has all the necessary parts and some additional ones. Installed on 96 4Runner 4x4.
5 out of 5 - Great product - easy install
Jc - . Prothane 181116
Ordered parts, they were not in stock at the time but Graham made it a very fast delivery. When parts got in, they were the right ones as I ordered and he threw in extra for my wait. Would Highly Recommend Friends And Family To Buy Parts From His Company. Thanks Again From A Very Satisfied Customer
5 out of 5 - Great Customer Support
Alfred S Braconnier - . Prothane 181116