• 191714 Tie Rod Dust Boots
  • 191714 Tie Rod Dust Boots

Tie Rod Dust Boots

Manufacturer: Prothane
Part Number: 191714
Rating 4


Price: $4.17

In Stock Ships Immediately


Outer Tie Rod Dust Boots - Chevrolet C10 Pickup

Pin Opening Diameter Base Opening Diameter Height of Boot Piece Number
(0.65 inch)
(1.625 inch)
(0.965 inch)
Here is our complete list of universal dust boots.
FitmentTie Rod Dust Boots 191714 fits these vehicles:
  • 2 of Tie Rod Dust Boots - 60515
  • Lifetime Warranty. Prothane guarantees all Prothane Suspension Parts to be free of defects in materials and workmanship (not due to abuse, neglect or misapplication) for the total time the vehicle remains with the original purchaser of the product(s). Should the products fail to meet these conditions, Prothane will replace the product, free of charge. This excludes any and all related labor charges. The product must be shipped to Prothane (postage prepaid) along with a copy of the original receipt."
  • Cross Reference from 191714 to 9.13119Energy Suspension 9.13119
    Price: $3.64
    Warranty: 2 Year Warranty

Prothane Polyurethane Universal Dust Boots

Many of you are finding out that the rubber boot on your ball joint or tie rod has rotted away or has split. These boots are extremely important for the suspension of your vehicle. Fortunately, Prothane makes Universal Dust boots that will fit most vehicles. These dust boots are made of polyurethane and are far more durable than rubber. This will seal your boot to retain the grease in the joint, as well as protecting the joint from dirt, sand, water and snow.

Prothane Dust Boots

Prothane Dust Boots

How-to obtain measurements

In order to select the proper boot, you will first need to grab a few measurements. The best way to do this is with a set of digital calipers. You will need to measure the diameter of the base where the boot will sit, the diameter of the shaft (also called the Pin Opening Diameter) and the height of the boot. Once you have gotten to your tie rod end measure these three spots. Be sure to be as exact as possible and to write down your measurements. If you have any trouble getting these measurements, give our customer service team at DST a call.

It is important to note that you do not want to choose a boot that is bigger than your measurements. You want to choose a boot that is just slightly smaller than the measurements you obtained. The elasticity of the polyurethane will allow the hole to stretch and grip the joint tightly. If you choose a boot that is too large there will be a gap which lets in debris.

Does this boot match your needs?

Now that you have these measurements, you can verify that this is the boot that you need. If you find that your measurements do not match this boot, go to our Universal Dust Boot page to match a part to your measurements.

Prothane Dust Boots
Prothane 191714

Product Reviews for Outer Tie Rod Dust Boots 191714

Prothane 191714

5 out of 5 based on 4 user reviews. Write a Review

Boots have held up very well.
5 out of 5 - Review 2 Years Later
James H. Walker - . Prothane 191714
These did fit good, although not perfect.
4 out of 5 - good
John R. Courtney, Jr. - . Prothane 191714
parts measured as advertised, making installation easy.
5 out of 5 - good
warren parks - . Prothane 191714
Good product good price good fit.
5 out of 5 - saved alot of money didnt have to replace the while part
william cooper - . Prothane 191714
Fitment for 191714