• 191715 Ball Joint Dust Boots
  • 191715 Ball Joint Dust Boots

Ball Joint Dust Boots

Manufacturer: Prothane
Part Number: 191715
Rating 10


Red (Accept Special Order)
Price: $7.17

In Stock Ships Immediately


Ball Joint Dust Boots - Chevrolet Chevelle - 191715

Pin Opening Diameter Base Opening Diameter Height of Boot Piece Number
(0.65 inch)
(1.6375 inch)
(1.15 inch)
(0.55 inch)
(1.435 inch)
(1.35 inch)
Here is our complete list of universal dust boots.
FitmentBall Joint Dust Boots 191715 fits these vehicles:
  • 2 of Ball Joint Dust Boot, Large - 60516
  • 2 of Ball Joint Dust Boot, Small - 60517
  • Lifetime Warranty. Prothane guarantees all Prothane Suspension Parts to be free of defects in materials and workmanship (not due to abuse, neglect or misapplication) for the total time the vehicle remains with the original purchaser of the product(s). Should the products fail to meet these conditions, Prothane will replace the product, free of charge. This excludes any and all related labor charges. The product must be shipped to Prothane (postage prepaid) along with a copy of the original receipt."
  • Cross Reference from 191715 to 9.13125Energy Suspension 9.13125
    Price: $6.75
    Warranty: 2 Year Warranty

  • Cross Reference from 191715 to 9.13127Energy Suspension 9.13127
    Price: $6.75
    Warranty: 2 Year Warranty

Prothane Polyurethane Universal Dust Boots

Many of you are finding out that the rubber boot on your ball joint or tie rod has rotted away or has split. These boots are extremely important for the suspension of your vehicle. Fortunately, Prothane makes Universal Dust boots that will fit most vehicles. These dust boots are made of polyurethane and are far more durable than rubber. This will seal your boot to retain the grease in the joint, as well as protecting the joint from dirt, sand, water and snow.

Prothane Dust Boots

Prothane Dust Boots

How-to obtain measurements

In order to select the proper boot, you will first need to grab a few measurements. The best way to do this is with a set of digital calipers. You will need to measure the diameter of the base where the boot will sit, the diameter of the shaft (also called the Pin Opening Diameter) and the height of the boot. Once you have gotten to your tie rod end measure these three spots. Be sure to be as exact as possible and to write down your measurements. If you have any trouble getting these measurements, give our customer service team at DST a call.

It is important to note that you do not want to choose a boot that is bigger than your measurements. You want to choose a boot that is just slightly smaller than the measurements you obtained. The elasticity of the polyurethane will allow the hole to stretch and grip the joint tightly. If you choose a boot that is too large there will be a gap which lets in debris.

Does this boot match your needs?

Now that you have these measurements, you can verify that this is the boot that you need. If you find that your measurements do not match this boot, go to our Universal Dust Boot page to match a part to your measurements.

Prothane Dust Boots
Prothane 191715

Product Reviews for Ball Joint Dust Boots 191715

Prothane 191715

5 out of 5 based on 10 user reviews. Write a Review

The rubber boots that came with the suspension kit, torn during installation, so I ordered your companies boots to replace them, and what a great fit! They are durable and will last..\n\nThank you
5 out of 5 - Good
Steven Avilla - . Prothane 191715
Better quality than the original - would purchase again with no hesitation.
5 out of 5 - Nice product - better than original.
Ed Smith - . Prothane 191715
Very pleased with the boots. Easy installation and they fit correctly as should.
5 out of 5 - fits correctly
mark chonoski - . Prothane 191715
The ball joint dust boots fit my 69 camaro pretty well. The fit over the stud was perfect, although they seemed a little tight on the ball end. It looks like they will function as expected. I like them over the stock parts.
5 out of 5 - parts were well made
brian rogers - . Prothane 191715
Speedy shipping , nice sales personel , great quality. Thanks!
5 out of 5 - Great
Sherell Shepherd - . Prothane 191715
worked great - no issues - very pleased!
5 out of 5 - Perfect Match!
Troy A. Harrison - . Prothane 191715
The Prothane Ball Joint Dust Boots fit well and appear to be very good quality. They are not designed as the originals, so should not be considered for a show quality restoration. If you need replacement boots for a daily driver, you will find these to be perfect.
4 out of 5 - Good quality service part
Frank Mauceri - . Prothane 191715
Fit & look great.
5 out of 5 - Great
Tim Garrison - . Prothane 191715
This product is well designed and of good quality. I would recommend this product to anyone who is looking to replace the dust boots on their vehicle.
5 out of 5 - Excellent
John Anne Jr. - . Prothane 191715
Uppers went on with no problem. However the lowers were a bit to small to seal around the top of the ball joint. When installed one side wanted to fold up leaving an open spot. I had to take them off and and work the lower lip out a couple of times. This required them coming off and on a few times. The last time I installed them I used a small flat blade screw driver to hold the lip out when I dropped the spindle back on. After this they seemed to stay on and made contact all the way around the bottom. I can say the company was very helpful and shipped them to me right away. I can also say I would buy from them again without question. As with most after market parts there is always a little fine tuning to get things to fit. This part was going on a 1937 Pontiac coupe with a 1968 Nova front clip I have changed from drum brakes to disc brakes.
5 out of 5 - Good but not great
Jimmy L Whalen Jr - . Prothane 191715
Fitment for 191715