4.5146 | Rear Sway Bar-Endlink Bushing - 22mm | Ford Expedition

  • 4.5146 360image 1
  • 4.5146 Rear Sway Bar and Endlink Bushings - 22mm (0.86 inch)
  • 4.5146 Rear Sway Bar and Endlink Bushings - 22mm (0.86 inch)
  • 4.5146 Rear Sway Bar and Endlink Bushings - 22mm (0.86 inch)
  • 4.5146 Rear Sway Bar and Endlink Bushings - 22mm (0.86 inch)
  • 4.5146 Rear Sway Bar and Endlink Bushings - 22mm (0.86 inch)
  • 4.5146 360image large 1

Rear Sway Bar and Endlink Bushings - 22mm (0.86 inch)

Manufacturer: Energy Suspension
Part Number: 4.5146

:(?)
Black
Red

:(?)
Free Lifetime Warranty Upgrade
Price: $35.40

check_box In Stock check_box Ships Immediately


  • 2 - 5405 22mm sway bar bushings
  • 8 - 4902 end link bushings
  • 4 - 15.10.342.39 (11/16�O.D.x1/2�I.D.x1.250 sleeve)
  • 4 - 15.03.36.39 (1 3/4� O.D.x1/2�I.D.x.187 washer)
  • 2 - 15.05.48.39 (12mm x1.75 x65mm bolt)
  • 2 - 15.07.16.40 (12mmx 1.75 Nylock nut)
Suggested part for 4.5146: dll122
dll122 Front Sway Bar Lateral Locks - 21-22mm
DST's lateral locks prevent sway bar movement and fits OE and aftermarket bars.

Suggested part for 4.5146: 9.11110
9.11110 Formula 5 Prelube 3 - 5 mL Tubes
3 - 5ML High Performance Grease by Energy

  • Energy Suspension warrants its products against defects in workmanship and material for 24 months when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
Cross Reference from 4.5146 to 61143
Prothane 61143
Polyurethane.
Price: $24.86
Warranty: Lifetime Warranty

question_answer Ask us a Question

FitmentRear Sway Bar and Endlink Bushings - 22mm (0.86 inch) 4.5146 fits these vehicles:
Details
Polyurethane Rear Sway Bar and Endlink Bushings
Improved handling, low cost, and easy installation are just some of the reasons these components are so popular!

4.5146 | Rear Sway Bar-Endlink Bushing - 22mm | Ford Expedition

Only Fits 22 mm Bar
Polyurethane Rear Sway Bar and Endlink Bushings
  • Your vehicle's sway bar system will work at its maximum efficiency!
  • Replaces that original, short lived and too-soft rubber.
  • Easy to install with basic tools.
  • Made of rugged Energy's HYPERFLEX performance polyurethane material and the hardware is heavy duty for lasting durability.
Footnotes

Energy Suspension Sway Bar Bushings

Energy Suspension Hyperflex Sway Bar bushings are made of polyurethane, which is a much more durable material for suspension bushings than rubber. Polyurethane does not break down due to road grime, weather or oils the way the rubber can. Have the peace of mind knowing you have a long lasting part on your sway bar with Energy Suspension's sway bar bushings. Energy Suspension's polyurethane sway bar bushings provide a secure grip on the sway bar and do not warp over time. With this snug grip, your vehicle will see a performance boost similar to installing a larger sway bar.

Energy Sway Bar Bushing
Faulty Rubber

Faulty Rubber

A sway bar's function is to maintain the maximum amount of road contact during tires. The sway bar is held to the frame of the vehicle with a sway bar bushing. Original Equipment rubber can warp and/or crack, losing its grip on the bar. This causes your sway bar to lose its effectiveness. Just look at the old rubber sway bar bushing to the left. Imagine how good of a grip that thing could keep on a sway bar. Go with Polyurethane.

Be sure to use Formula 5

The sway bar bushing sees a lot of action, so make sure you grease it well with Energy Suspension's own Formula 5 Bushing Lubricant. Using plenty of grease is the best way to ensure a long lasting part without any squeaking. If you'd like some extra grease just in case, pick up an extra 3 pack or an 8 ounce tube.

Formula 5 Gif
Energy Suspension 4.5146

Product Reviews for 4.5146 | Rear Sway Bar-Endlink Bushing - 22mm | Ford Expedition

5 Star (2)
50%
4 Star (1)
25%
3 Star (1)
25%
2 Star (0)
0%
1 Star (0)
0%
starstarstarstarstar_border

Energy Suspension 4.5146

4 out of 5 based on 4 user reviews. Write a Review

C
verified_user

starstarstarstar_borderstar_border" Review 2 Years Later "

Cant tell a difference in the ride between this and the factory. All it does it pop now. Editors Note: Contacted customer about the issue he was having with the noise. Had him contact Energy tech support. The issue was resolved. The bushings were not properly greased when bushings were installed.

verified_user Verified Buyer - - . Energy Suspension 4.5146 - 3 out of 5
T
verified_user

starstarstarstarstar_border" Product was great. Instructions were nill. "

First off, I am not a mechanic. I was told by my neighbors (and my mechanic)this should be a piece of cake to install yourself. Yes, it was easy to install. But, it came with no instructions whatsoever and the instructions on-line did not match my car. 2000 Lincoln Navigator 4WD. The kit comes with 2 bolts but the linkage requires 4. The kit came with 4 metal insert tubes but if you use 2 of the bolts from the car (oversized to fit bushings without the insert) you only need 2. I had to decide which parts to use OEM and which to use from the kit.

verified_user Verified Buyer - - . Energy Suspension 4.5146 - 4 out of 5
J
verified_user

starstarstarstarstar" Loved Them "

Made a night and day difference, had a lot of body roll. Much better handling on the on and off ramps.

verified_user Verified Buyer - - . Energy Suspension 4.5146 - 5 out of 5
J
verified_user

starstarstarstarstar" A+++++++++ "

Quick and Easy change out....Parts fit perfectly....Vastly improved the ride and control of the vehicle.......Thanks

verified_user Verified Buyer - - . Energy Suspension 4.5146 - 5 out of 5

compare_arrows Compare with Similar Parts


This Part
4.5146 compare
$35.40
Prothane
Prothane compare
$24.86
($10.54) cheaper