Motor Mount Inserts - Dodge Neon - Prothane 41905

  • 41905 360image 1
  • 41905 Motor Mount Inserts - Upper and Lower - Race
  • 41905 Motor Mount Inserts - Upper and Lower - Race
  • 41905 Motor Mount Inserts - Upper and Lower - Race
  • 41905 Motor Mount Inserts - Upper and Lower - Race
  • 41905 Motor Mount Inserts - Upper and Lower - Race
  • 41905 360image large 1

Motor Mount Inserts - Upper and Lower - Race

Manufacturer: Prothane
Part Number: 41905

:(?)
Black
Red
Price: $12.80

check_box In Stock check_box Ships Immediately


  • 2 of Motor Mount Inserts - 69156
  • 1 of Steel Washers - 1159 (1/2 ID X 2 OD inches)
  • 1 of Steel Washers - 1181 (9/16 ID X 2 OD inches)
  • Lifetime Warranty. Prothane guarantees all Prothane Suspension Parts to be free of defects in materials and workmanship (not due to abuse, neglect or misapplication) for the total time the vehicle remains with the original purchaser of the product(s). Should the products fail to meet these conditions, Prothane will replace the product, free of charge. This excludes any and all related labor charges. The product must be shipped to Prothane (postage prepaid) along with a copy of the original receipt."

question_answer Ask us a Question

FitmentMotor Mount Inserts - Upper and Lower - Race 41905 fits these vehicles:
Details

Motor Mount Inserts - Dodge Neon - Prothane 41905

Race Hardness. Softer Street Hardness is Available 41906

Prothane Motor Mount Inserts

Prothane's motor mount inserts are crafted out of polyurethane, a material much more durable than rubber that can handle intense weight, heat, and pressure. Designed to fill the voids built into your OE motor mounts, these inserts will drastically increase the power transfer efficiency from your engine to the wheels. Since the voids were initially put there to reduce NVH, it stands to reason that filling in those voids will have the opposite effect. Installing Prothane's motor mount inserts may increase your NVH, but the increase to overall performance is worth it to some drivers. To top it all off, Prothane's motor mount inserts are covered by a lifetime warranty handled in-house here at DST.

Prothane Motor Mount Inserts Box
Prothane Motor Mount Inserts

OE Motor Mounts

OE motor mounts are usually made out of metal with holes strategically placed to keep most of the engine's vibrations from traveling to the cab. While the OE mounts are decent for the daily driver, the weekend warrior or straight up racer will probably look for an upgrade. Prothane's Polyurethane motor mount inserts offer a great performance boost equal to that of a solid motor mount, without the higher cost.

Prothane 41905

Product Reviews for Motor Mount Inserts - Dodge Neon - Prothane 41905

5 Star (4)
100%
4 Star (0)
0%
3 Star (0)
0%
2 Star (0)
0%
1 Star (0)
0%
starstarstarstarstar

Prothane 41905

5 out of 5 based on 4 user reviews. Write a Review

J
verified_user

starstarstarstarstar" Very good "

A little difficult to install, had to do a little reshaping, but overall the results in performance were impressive.

verified_user Verified Buyer - - . Prothane 41905 - 5 out of 5
C
verified_user

starstarstarstarstar" Awesome "

I love the performance boost by using these. Relatively easy to install. Installation directions should include some pictures or diagrams to show what rubber needs to be removed for installation. I found a light touch with a rotary tool was a lot faster for this then the recommended hobby knife. I used a drop shaped cutting bit.

verified_user Verified Buyer - - . Prothane 41905 - 5 out of 5
M
verified_user

starstarstarstarstar" Great product "

Very easy to install (takes about 30 minutes to install). It adds a little vibration when running at idle, but you'll get used to that. It's probably the best upgrade under $25 you can get. Wheel hop is eliminated, engine sits firmly in the mounts and almost doesn't move. Shifting performance is greatly improved, the power is more directly transferred to the wheel.

verified_user Verified Buyer - - . Prothane 41905 - 5 out of 5
D
verified_user

starstarstarstarstar" ok. "

Received the parts in good time. Material appears to be of good quality. Parts did not fit easily into existing motor mounts. Removing the web from motor mounts is not an easy task. It is possible that the motor mounts are of poor quality. I had to remove part of the mount in order for the inserts to fit well.. ounce in the car, these parts seem to work very well. I ordered parts for a 2003 Neon 2.0. These look like the same parts used on certain Hondas.

verified_user Verified Buyer - - . Prothane 41905 - 5 out of 5