• 4206 Front Control Arm Bushings (without outer metal shells)
  • 4206 Front Control Arm Bushings (without outer metal shells)

Front Control Arm Bushings (without outer metal shells)

Manufacturer: Prothane
Part Number: 4206
Rating 1


Price: $26.97

In Stock Ships Immediately

Dodge Front Control Arm Replacement Bushings Kit

  • One Set Will Cover the Left and Right Side
FitmentFront Control Arm Bushings (without outer metal shells) 4206 fits these vehicles:
  • 4 of Front Control Arm Bushings, Small - 60005
  • 4 of Metal Sleeves - 60503 (3/4 X .120 X 1.650 inches)
  • 2 of Front Control Arm Bushings, Large - 64140
  • 8 of Flat Washers - 1121
  • 1 of Super Grease - 19-1750-001
  • Lifetime Warranty. Prothane guarantees all Prothane Suspension Parts to be free of defects in materials and workmanship (not due to abuse, neglect or misapplication) for the total time the vehicle remains with the original purchaser of the product(s). Should the products fail to meet these conditions, Prothane will replace the product, free of charge. This excludes any and all related labor charges. The product must be shipped to Prothane (postage prepaid) along with a copy of the original receipt."
  • Cross Reference from 4206 to 4202Prothane 4202
    Polyurethane. Uppers Only (without shells)
    Price: $19.17
    Warranty: Lifetime Warranty

  • Cross Reference from 4206 to 4205Prothane 4205
    Polyurethane. Lowers Only
    Price: $11.37
    Warranty: Lifetime Warranty

  • Cross Reference from 4206 to 4215Prothane 4215
    Polyurethane. Includes New Outer Shells for Uppers
    Price: $55.77
    Warranty: Lifetime Warranty

Prothane Control Arm Bushings

A control arm bushing plays a vital role in a suspension. Replace those faulty O.E. rubber bushings with Prothane's polyurethane control arm bushings. These polyurethane bushing provide the longevity and performance needed to maximize a suspension's efficiency.

Prothane's polyurethane is a firmer bushing than the O.E. Not only does this increase the longevity of the bushing, but gives the suspension a boost in handling performance. With a firmer bushing there will be a slight increase in NVH (noise, vibration and harshness), but most drivers prefer the boost in performance in spite of that.

Prothane Control Arm Bushings Box

Worn Rubber Bushing

The Faulty O.E.

As your suspension travels, a rubber control arm bushing is repeatedly stretching and flexing. After a while, the center sleeve begins to sag and your suspension alignment is throw out of whack. The sagging will go on until the rubber fails completely.

Use Prothane's Super Grease

Control arm bushings are a high stress part, so be sure to use the supplied Prothane's Super Grease to lubricate the bushings during installation. Its super important that you lubricate each bushing well to prevent any squeaking. If you'd like some extra grease just in case, pick up an extra 3 pack.

Prothane Control Arm Grease
Prothane 4206

Product Reviews for Front Control Arm Bushings 4206

Prothane 4206

5 out of 5 based on 1 user reviews. Write a Review

Everything fits nice and tight and wasn't too difficult to install.
5 out of 5 - Excellent
Nate Carls - . Prothane 4206
Fitment for 4206