• 71171 Rear Sway Bar and Endlink Bushings - 27.94mm (1.10 Inch)
  • 71171 Rear Sway Bar and Endlink Bushings - 27.94mm (1.10 Inch)
  • 71171 Rear Sway Bar and Endlink Bushings - 27.94mm (1.10 Inch)
  • 71171 Rear Sway Bar and Endlink Bushings - 27.94mm (1.10 Inch)
  • 71171 Rear Sway Bar and Endlink Bushings - 27.94mm (1.10 Inch)

Rear Sway Bar and Endlink Bushings - 27.94mm (1.10 Inch)

Manufacturer: Prothane
Part Number: 71171
Rating 4


Red (Accept Special Order)
Price: $17.97

In Stock Ships Immediately


CHEVROLET Suburban Rear Sway Bar and Endlink Bushings

1.10" Bar Only
  • One Set Will Cover the Left and Right Side
FitmentRear Sway Bar and Endlink Bushings - 27.94mm (1.10 Inch) 71171 fits these vehicles:
  • 2 of Rear Sway Bar Bushings (1.10 inches)
  • 4 of End Link Bushings - 61158
  • 2 of Metal Sleeves - 60854 (3/4 X .134 X 1.500 inches)
  • 1 of Super Grease - 19-1750-001
  • Suggested part for 71171: DLL130-RearDLL130-Rear Rear Sway Bar Lateral Lock - 28-30mm
    DST Silver Color - Limited Lifetime Warranty

  • Suggested part for 71171: KLL130KLL130 Sway Bar Lateral Lock - 28-30mm
    Whiteline Gold Color Plated - 3 Year Warranty

  • Suggested part for 71171: 191750191750 Super Grease 3 Pack
    Prothane provides grease to install these parts, but you can never have too much. Grab an extra 3-pack of grease so you can more liberally apply grease when installing.

  • Lifetime Warranty. Prothane guarantees all Prothane Suspension Parts to be free of defects in materials and workmanship (not due to abuse, neglect or misapplication) for the total time the vehicle remains with the original purchaser of the product(s). Should the products fail to meet these conditions, Prothane will replace the product, free of charge. This excludes any and all related labor charges. The product must be shipped to Prothane (postage prepaid) along with a copy of the original receipt."

Prothane Sway Bar Bushings

A sway bar bushing plays a huge role in your suspension, so don't settle for rubber. Prothane Sway Bar bushings are made of polyurethane, a much more durable material for suspension bushings than rubber. Polyurethane does not break down due to road grime, weather or oils the way the rubber can. Have the peace of mind knowing you have a long lasting part on your sway bar with Prothane's sway bar bushings. Prothane's polyurethane sway bar bushings provide a secure grip on the sway bar and does not warp over time. With this snug grip, your vehicle will see a performance boost similar to installing a larger sway bar.

Prothane Bushing Box

Faulty Rubber

Faulty Rubber

A sway bar's function is to maintain the maximum amount of road contact during tires. The sway bar is held to the frame of the vehicle with a sway bar bushing. Original Equipment rubber can warp and/or crack, losing its grip on the bar. This causes the your sway bar to lose it's effectiveness. Just look at the old rubber sway bar bushing to the left. Imagine how good of a grip that thing could keep on a sway bar. Go with Polyurethane.

Use Prothane's Super Grease

The metal sway bar rotates inside the sway bar bushings, so be sure to use the supplied Prothane's Super Grease to lubricate the bushings during installation. Its super important that you lubricate each bushing well to prevent any squeaking. If you'd like some extra grease just in case, pick up an extra 3 pack.

Prothane Control Arm Grease
Prothane 71171

Product Reviews for Rear Sway Bar Bushings 71171

Prothane 71171

5 out of 5 based on 4 user reviews. Write a Review

Everything included for an easy install. Product works exactly as expected. Great quality products.
5 out of 5 - as advertised
Rob Milham - . Prothane 71171
With the 2003 Tahoe running at over 190,000 miles, the factory rubber bushings were beginning to "egg-out". I purchased the front and rear sway bar kits, and installed both in under roughly 1.5 hours....no suspension press or major disassembly required. In fact, after taking the front apart, I discovered one of the Chevy dealers had overtorqued the link bushings, distorting them to the point of permanent damage (the nylon locknut for these bushings requires less than 8 ft-lbs of torque)...just wish I would have made the change to these new bushings about 50,000 miles ago.
5 out of 5 - good price, great kit
philip fischer - . Prothane 71171
They were easy to install and inproved the ride
4 out of 5 - good
Joe M. Wells Jr - . Prothane 71171
I put the front and rear sway bar bushing kits on at the same time. I drive a hwy with lots of curves on it almost every day (HWY 17 in Cali) and this has made a HUGE difference. It feels much more solid.
5 out of 5 - What a difference!!!
Jason Holbrook - . Prothane 71171
Fitment for 71171