Universal Sway Bar Endlinks

If your vehicle uses standard straight bolt endlinks, you can use this page to find the correct Universal Endlinks. With the car level on the ground, check to make sure the sway bar bar and control arms are parallel to each other (B and C). Once they're parallel, you can measure the “A” dimension. (front center of stabilizer bar to control arm) and compare the measured length to table below to find the correct endlinks for your vehicle.

Images	Length of "A"	Part Type	Part Number
	N/A	7/16 Inch (11.1mm) Inner Diameter 1-1/4 Inches (31.7mm) Outer Diameter 3/4 Inch (19.0mm) Tall	19426
	N/A	3/8 Inch (9.5mm) Inner Diameter 1 Inch (25.4mm) Outer Diameter 1/2 Inch (12.7mm) Tall	19427
	N/A	3/8 Inch (9.5mm) Inner Diameter 1 Inch (25.4mm) Outer Diameter 5/8 Inch (15.8mm) Tall	19428
	N/A	3/8 Inch (9.5mm) Inner Diameter 1 Inch (25.4mm) Outer Diameter 3/4 Inch (19.0mm) Tall	19429
	N/A	Grommets with Washers 1-1/8 Inches (28.5mm) Outer Diameter 5/8 Inch (15.8mm) Tall Includes Washers	19430
	N/A	3/8 Inch (9.5mm) Inner Diameter 1.15 Inch (29.2mm) Outer Diameter 5/8 Inch (15.9mm) Tall	191816
	N/A	3/8 Inch (9.5mm) Inner Diameter 1.15 Inch (29.2mm) Outer Diameter 3/4 Inch (19.0mm) Tall	191817
	1-3/8 Inch (34.9mm)	Straight Bolt	19420
	2-3/8 Inch (60.3mm)	Straight Bolt	19401
	2-5/8 Inch (66.6mm)	Straight Bolt	19403
	2-3/4 Inch (69.8mm)	Straight Bolt	19421
	3 Inch (76.2mm)	Straight Bolt	19402
	3-1/4 Inch (82.5mm)	Straight Bolt	19405
	3-1/2 Inch (88.9mm)	Straight Bolt	19406
	3-3/4 Inch (95.2mm)	Straight Bolt	19404
	4-1/4 Inch (107.9mm)	Straight Bolt	19408
	4-1/2 Inch (114.3mm)	Straight Bolt	19409
	4-5/8 Inch (117.4mm)	Straight Bolt	19424
	4-3/4 Inch (120.6mm)	Straight Bolt	19412
	5 Inch (120.6mm)	Straight Bolt	19416
	5-3/8 Inch (136.5mm)	Straight Bolt	19413
	6-1/8 Inch (155.5mm)	Straight Bolt	19417
	7-3/8 Inch (187.3mm)	Straight Bolt	19419

Adjustable Threaded Endlinks

The endlinks in this table are not made by Prothane. They are made by the manufacturer Whiteline. Whiteline's adjustable threaded endlinks are built differently from Prothane's endlinks. Whiteline Universal Endlinks for-go the use of a spacer sleeve and instead utilize a double threaded bolt that allows for a secondary nut to be threaded up or down either side of the endlink in order to fit a wider range of spacings between the sway bar and its mounting point.

Image	Bolt Length	Part Number	Brand
	140mm	W21806S	Whiteline
	165mm	W21807S	Whiteline
	200mm	W21808S	Whiteline
	240mm	W21809S	Whiteline
	280mm	W21810S	Whiteline