unarchive In The Box of moog-k700542 keyboard_arrow_down
- Qty 1 Stabilizer Bar Link
lock Warranty Information keyboard_arrow_down
Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.
WARRANTY:
Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.
Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.
If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.
Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)
Moog has engineered a new line of end links to enhance durability and performance.
Moog Problem Solver: Sway Bar End Links
Raising the bar
Moog's Problem Solver sway bar link kits have raised the bar for OE replacement links. Targeting the easily corroded traditional non-socket style links, Moog has engineered a new line of end links to enhance durability and performance. The entire line of Moog's Problem Solver end links are available right here at DST and include a lifetime warranty.
Original design and other supplier's flaws
The traditional non-socket style sway bar link that is installed factory on vehicles is highly susceptible to early failure. The OE design, as well as many aftermarket suppliers, use a small diameter bolt on the sway bar link. This small size bolt opens up the link to the damaging effects of road shock and corrosion. If the smaller bolt isn't bad enough, these links utilize neoprene bushings that do not stand up well to stress and weather conditions. Many suppliers also use a rolled steel sleeve which can allow harmful contaminants in, leading to corrosion and early failure.
Moog problem solving features
Moog's problem solver parts target factory defects or poor original design, replacing them with a better more durable part. Moog's sway bar link set provides enhanced performance and increased durability. This new design includes polyurethane bushings. These polyurethane bushings are much more durable than the neoprene.
Durable hardware
A black oxide 3/8" Grade 8 bolt provides increase strength and corrosion protection. Paired with a barrel nut that provides proper thread engagement, these "problem solving" end links are much easier to install. Nested washers are included to help keep the bushings centered during installation. The T6 aluminum hex spacer keeps contaminants out and is anodized to prevent corrosion.
Sway Bar End link Part Numbers
Moog has engineered several sizes of end links to cover numerous vehicles. While the length varies depending on the vehicle, all of Moog's Problem Solver sway bar end links include these problem-solving features.
Product Reviews for moog-k700542 | Front Sway Bar End Link Kit | Dodge Ram 1500 1994-2001
- 5 Star (16)
-
-
- 89%
-
- 4 Star (2)
-
-
- 11%
-
- 3 Star (0)
-
-
- 0%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (0)
-
-
- 0%
-
MOOG moog-k700542
starstarstarstarstar" Review 2 Years Later "
Still doing fine, no signs of breaking down.
verified_user Verified Buyer - James E Schoonmaker - . MOOG moog-k700542 - 5 out of 5starstarstarstarstar" Review 2 Years Later "
Ok
verified_user Verified Buyer - thomas haberle - . MOOG moog-k700542 - 5 out of 5starstarstarstarstar" Quality Construction "
Durable, easy to install, high quality.
verified_user Verified Buyer - Dominic joseph Annese - . MOOG moog-k700542 - 5 out of 5starstarstarstarstar" Good "
Easy to install & good quality.
verified_user Verified Buyer - Tyler Patel - . MOOG moog-k700542 - 5 out of 5question_answer Customer Questions and Answers
- Question:
- Do you need to grease the bushings on part number k700542?
- Answer:
- No, you will not need to grease the bushings on part number k700542.
- Question:
- How long is this endlink?
- Answer:
- Part number moog-k700542 is 9.5 inches long.
- Question:
- I just purchased sway bar links set for my Ford explore XLT 1996 I read the instructions on how it is to install but to be quite frank I’m not understanding what is too tight or what is to lose as far as fastening the notes to the links
- Answer:
- Install the end link. Once installed Tighten the nut while spinning the spacer. When you cannot spin the spacer tighten the nut 3-5 additional revolutions. Because the polyurethane bushings have some give there is not a torque spec.
- Question:
- my truck is lifted and does not take the stock sway bar links, what is the length of the spacer in this kit
- Answer:
- The overall length on part number moog-k700542 is 9.5 inches and the sleeve length is 5.67 inches.
- Question:
- What is the length of these sway bar end links?
- Answer:
- The length on part number moog-k700542 is 9.5 inches.
- Question:
- Moog-k700542 - 03 Ford Sport Trac- Does this kit include one piece or two to cover both sides?
- Answer:
- Moog-K700542 is sold as a single endlink per kit. You will need two of this kit to cover both left and right endlinks.
- Question:
- Does this kit do both sides or just one?
- Answer:
- All Moog end links are sold individually. If replacing left and right side end links you would purchase 2.