Transmission Mount - Ford Mustang - 4.1136

  • 4.1136 360image 1
  • 4.1136 Transmission Mount
  • 4.1136 Transmission Mount
  • 4.1136 Transmission Mount
  • 4.1136 Transmission Mount
  • 4.1136 Transmission Mount
  • 4.1136 360image large 1

Transmission Mount

Manufacturer: Energy Suspension
Part Number: 4.1136

:(?)
Black
Red

:(?)
Free Lifetime Warranty Upgrade
Price: $52.28

check_box In Stock check_box Ships Immediately


  • 1 of 1287 - Transmission Mount
  • 1 of 15.08.35.39 - Backing Plate
  • 4 of 15.03.42.39 - Flat Washers
  • 2 of 15.03.48.39 - Lock Washers
  • 4 of 15.05.30.39 - Bolts 7/16-14
  • Energy Suspension warrants its products against defects in workmanship and material for 24 months when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
Cross Reference from 4.1136 to 61605
Prothane 61605
Polyurethane.
Price: $65.23
Warranty: Lifetime Warranty

question_answer Ask us a Question

FitmentTransmission Mount 4.1136 fits these vehicles:

Transmission Mount - Ford Mustang - 4.1136

Energy Suspension 4.1136

This is Energy Suspensions's Transmission Mount Kit for many late sixties and early seventies model Ford vehicles. The 4.1136 kit by Energy Suspension will completely replace the old rubber transmission mount on your vehicle with their patented Hyper-Flex polyurethane. Over time, old rubber OE transmission mount will wear out and can tear away from the mounting bracket. This causes excessive movement from your transmission, which can lead to damage to many other parts of your vehicle, especially the drivetrain.

Energy Suspension Transmission Mount 4.1136
Energy Suspension Transmission Mount 4.1136 Preload Plate

Transmission Mounts

This kit will include one transmission mount, along with four new bolts and washers to bolt the transmission mount to your vehicle. The transmission mount will also include a new preload plate to be installed with the polyurethane mount. Your OE rubber mounts are bonded to a metal plate for mounting purposes only. But Energy Suspension has created this preload plate to evenly distribute the load for better surface contact and to offer more support for the polyurethane. All of these mounts and hardware are all zinc coated to prevent corrosion for a long maintenance free life.

Made for your Vehicle

Energy Suspension has engineered this mount specifically to address the worn out OE mounts. They have developed this Hyper-Flex polyurethane mount to provide firm support for your transmission, protecting you from costly drivetrain repairs down the road. They do this by specifically formulating the firmness of the polyurethane to match your specific chassis. This carefully designed durometer will also be soft enough to isolate the vibration transferred to the chassis for a quieter ride.

4.1136 Diagram
Energy Suspension 4.1136

Product Reviews for Transmission Mount - Ford Mustang - 4.1136

5 Star (2)
100%
4 Star (0)
0%
3 Star (0)
0%
2 Star (0)
0%
1 Star (0)
0%
starstarstarstarstar

Energy Suspension 4.1136

5 out of 5 based on 2 user reviews. Write a Review

V
verified_user

starstarstarstarstar" great.looks good. "

The mount will bolt to my ford toploader transmission with no modification. The crossmember mount bolt holes required to be made wider by 1/16, and I used a hand file on the extreme outer edge of each hole. I was able to do this because the original bolt holes are 1/2 and the mount holes are 7/16 which already have clearance. I have fitted the spacer plate. Also removed the urethane that protrudes from the top side of the mount, so when it is tightened to the trans it does not push out the lower section of mount that is in contact with the crossmember. This mount is easier to fit as it does not have any studs from the crossmember side .

verified_user Verified Buyer - - . Energy Suspension 4.1136 - 5 out of 5
V
verified_user

starstarstarstarstar" great.looks good. "

The mount will bolt to my ford toploader transmission with no modification. The crossmember mount bolt holes required to be made wider by 1/16, and I used a hand file on the extreme outer edge of each hole. I was able to do this because the original bolt holes are 1/2 and the mount holes are 7/16 which already have clearance. I have fitted the spacer plate. Also removed the urethane that protrudes from the top side of the mount, so when it is tightened to the trans it does not push out the lower section of mount that is in contact with the crossmember. This mount is easier to fit as it does not have any studs from the crossmember side .

verified_user Verified Buyer - - . Energy Suspension 4.1136 - 5 out of 5
Fitment for 4.1136

compare_arrows Compare with Similar Parts


This Part
4.1136 compare
$52.28
Prothane
Prothane compare
$65.23
($12.95) more expensive

question_answer Customer Questions and Answers


Question:
What is the spacing between bolt holes on the transmission side?
Answer:
On Part Number 4.1136 the spacing between the bolt holes is 5.5 inches.

Question:
Does this fit a C6 transmission? What is the dimensions.
Answer:
This mount should fit the C6 transmission. Here is the dimensions of this mount: Height including the reinforcement plate: 1.851, Center to center spacing of the bolt holes on the transmission side 8.553 and Center to center spacing on the cross mem mber side: 2.376 ...see more