unarchive In The Box of 5.5152 keyboard_arrow_down
- 2 - 5601 - Rear Sway Bar Bushing, 16mm
- 4 - 8272 - End Link Bushing
- 1 - 9.11109 - Grease
lock Warranty Information keyboard_arrow_down
- Energy Suspension warrants its products against defects in workmanship and material for 24 months when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
Energy Suspension Sway Bar Bushings
Energy Suspension Hyperflex Sway Bar bushings are made of polyurethane, which is a much more durable material for suspension bushings than rubber. Polyurethane does not break down due to road grime, weather or oils the way the rubber can. Have the peace of mind knowing you have a long lasting part on your sway bar with Energy Suspension's sway bar bushings. Energy Suspension's polyurethane sway bar bushings provide a secure grip on the sway bar and do not warp over time. With this snug grip, your vehicle will see a performance boost similar to installing a larger sway bar.
Faulty Rubber
A sway bar's function is to maintain the maximum amount of road contact during tires. The sway bar is held to the frame of the vehicle with a sway bar bushing. Original Equipment rubber can warp and/or crack, losing its grip on the bar. This causes your sway bar to lose its effectiveness. Just look at the old rubber sway bar bushing to the left. Imagine how good of a grip that thing could keep on a sway bar. Go with Polyurethane.
Be sure to use Formula 5
The sway bar bushing sees a lot of action, so make sure you grease it well with Energy Suspension's own Formula 5 Bushing Lubricant. Using plenty of grease is the best way to ensure a long lasting part without any squeaking. If you'd like some extra grease just in case, pick up an extra 3 pack or an 8 ounce tube.
Product Reviews for 5.5152 | Rear Sway Bar Bushing 16mm | Chrysler PT Cruiser 01-10
- 5 Star (3)
-
-
- 75%
-
- 4 Star (1)
-
-
- 25%
-
- 3 Star (0)
-
-
- 0%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (0)
-
-
- 0%
-
Energy Suspension 5.5152
starstarstarstarstar" Review 2 Years Later "
Still firm.
verified_user Verified Buyer - Frank Aghbashian - . Energy Suspension 5.5152 - 5 out of 5starstarstarstarstar" Review 2 Years Later "
Great product. Much better quality than the factory bushings they replaced. Put these on both front and rear sway bars and you can feel the improvement in handling.\nBuy them, you wont be sorry.
verified_user Verified Buyer - George Whipple - . Energy Suspension 5.5152 - 5 out of 5starstarstarstarstar" Looked simple enough.... NOT "
So, just a few bushings to replace. This should be done in a short time. The first hurdle was removing the crusty old bushings and sleeves. After heating them up with a torch - separation!! Then pressing the slippery silicone into the ends of the links.! I was tempted to slice the bushing so I could fold it into itself and make it smaller. However I decided not to do that. So I pressed them in with a vice. Eventually all we installed and the car is very stable,
verified_user Verified Buyer - Christopher Ritchie - . Energy Suspension 5.5152 - 5 out of 5starstarstarstarstar_border
No instructions on how to install the smaller bushings.
verified_user Verified Buyer - Hamish Gordon - . Energy Suspension 5.5152 - 4 out of 5