unarchive In The Box of 191505 keyboard_arrow_down
- 2 of Sway Bar Bushing - 38mm (1.5 inch)
- 2 of Metal Brackets
- 1 of Super Grease
lock Warranty Information keyboard_arrow_down
- Lifetime Warranty. Prothane guarantees all Prothane Suspension Parts to be free of defects in materials and workmanship (not due to abuse, neglect or misapplication) for the total time the vehicle remains with the original purchaser of the product(s). Should the products fail to meet these conditions, Prothane will replace the product, free of charge. This excludes any and all related labor charges. The product must be shipped to Prothane (postage prepaid) along with a copy of the original receipt."
Prothane Universal Polyurethane Sway Bar Bushings
A very important aspect of your suspension set up that you probably don't know about is the sway bar bushings. But if you have found yourself on this page, more than likely you know what they are now. The sway bar bushings hold your sway bar firmly in place, allowing the sway bar to function like it is intended to: keeping maximum tire contact to the ground while cornering. Cracked or rotted sway bar bushings lead to sloppy handling, an annoying clunking and uneven tire wear. Either way, you look at it, not a good thing. A very important aspect of your suspension set up that you probably don't know about is the sway bar bushings. But if you have found yourself on this page, more than likely you know what they are now. The sway bar bushings hold your sway bar firmly in place, allowing the sway bar to function like it is intended to: keeping maximum tire contact to the ground while cornering. Cracked or rotted sway bar bushings lead to sloppy handling, an annoying clunking and uneven tire wear.
With the many different sizes of sway bars out there, Prothane has designed their line of Polyurethane Universal Sway Bar Bushings to fit any OE or aftermarket bar. These polyurethane bushings will grip the sway bar tightly and effectively giving your sway bar the performance of a larger sway bar. Installing these sway bar bushings will give your ride performance that wasn't possible even with brand new rubber bushings. You're going to have to measure your sway bar, if you have a pair of digital calibers, this process is pretty easy. Just measure your bar as close to the existing mount as possible. If you don't have any calipers, don't worry. Here at DST, we've come up with another simple method that involves items you surely have around the house. During installation be sure to grease these bushings good to prevent squeaking. The grease will stay in the channels on the inside of the sway bar bushing. If this bushing size does not match your sway bar diameter, go to the universal sway bar bushings page to find the proper size sway bar bushing.
Product Reviews for
- 5 Star (11)
-
-
- 92%
-
- 4 Star (1)
-
-
- 8%
-
- 3 Star (0)
-
-
- 0%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (0)
-
-
- 0%
-
Prothane 191505
starstarstarstarstar" Great Product! "
Ordered these because of a sway bar manufacturers overly complicated mounting hardware and these completely solved the problem. Very high-quality bracket with plating and quality bushing to go along with it. Would buy again if needed
verified_user Verified Buyer - Taylor Brown - . Prothane 191505 - 5 out of 5starstarstarstarstar" Easy to Install, Huge Driving Improvement "
I used this kit to replace the bushings on my 74 Airstream motorhome. Installation was a breeze. The improvement in handling was incredible since the old bushings were MIA.
verified_user Verified Buyer - Kevin Mitchell - . Prothane 191505 - 5 out of 5starstarstarstarstar" Review 2 Years Later "
Bushings are holding up well after two years with no squeaks or rattles.
verified_user Verified Buyer - Bob Fesperman - . Prothane 191505 - 5 out of 5starstarstarstarstar" Fit the f53 perfectly. Time will tell with the clamp. "
These fit my rear sway bar on my 1996 f53. They did not fit into the original clamps which are cast and much heavier than the clamps supplied with the bushings. I used the new clamps and they fit fine. The only risk I see are those rusting out where the originals never would.
verified_user Verified Buyer - Patrick Wright - . Prothane 191505 - 5 out of 5question_answer Customer Questions and Answers
- Question:
- What the center to center measurement of the bolt holes on the brackets?
- Answer:
- The bracket holes are slotted. The mininum spacing is 3 15/16 (3.31) to 4 3/8 (4.38). 191505 fits a 38mm or 1.5 inch sway bar.
- Question:
- What is the width of the bracket on part number 191505?
- Answer:
- Part number 191505 has a bracket width of 5-3/16.