unarchive In The Box of 7236 keyboard_arrow_down
- 2 of Large Control Arm Bushings - 64349 - OD=1.98in(50.39 mm)ID=.879in(22.33 mm)Length=3.69 in(93.80 mm)
- 2 of Medium Control Arm Bushings - 64348 - OD=1.98 in(50.47 mm)ID=.829 in(21.06 mm)Length=2.99 in(76 mm)
- 4 of Small Control Arm Bushings - 64347 - OD=1.5 in(38.84 mm)ID=.8 in(21.8mm)Length=1.8 in(45.17 mm)
- 2 of Metal Sleeves - 60502 (7/8 X .120 X 3.000 5/8 ID inches)
- 2 of Metal Sleeves - 60629 (7/8 X .120 X 2.560 inches)
- 3 of Super Grease - 19-1705-001
lock Warranty Information keyboard_arrow_down
- Lifetime Warranty. Prothane guarantees all Prothane Suspension Parts to be free of defects in materials and workmanship (not due to abuse, neglect or misapplication) for the total time the vehicle remains with the original purchaser of the product(s). Should the products fail to meet these conditions, Prothane will replace the product, free of charge. This excludes any and all related labor charges. The product must be shipped to Prothane (postage prepaid) along with a copy of the original receipt."
Prothane Control Arm Bushings
A control arm bushing plays a vital role in a suspension. Replace those faulty O.E. rubber bushings with Prothane's polyurethane control arm bushings. These polyurethane bushings provide the longevity and performance needed to maximize a suspension's efficiency.
Prothane's polyurethane is a firmer bushing than the O.E. Not only does this increase the longevity of the bushing but gives the suspension a boost in handling performance. With a firmer bushing, there will be a slight increase in NVH (noise, vibration, and harshness), but most drivers prefer the boost in performance in spite of that.
The Faulty O.E.
As your suspension travels, a rubber control arm bushing is repeatedly stretching and flexing. After a while, the center sleeve begins to sag and your suspension alignment is throw out of whack. The sagging will go on until the rubber fails completely.
Use Prothane's Super Grease
Control arm bushings are a high stress part, so be sure to use the supplied Prothane's Super Grease to lubricate the bushings during installation. Its super important that you lubricate each bushing well to prevent any squeaking. If you'd like some extra grease just in case, pick up an extra 3 pack.
Product Reviews for 7236 | Tahoe | Front Control Arm Bushing Replacement Kit
- 5 Star (2)
-
-
- 100%
-
- 4 Star (0)
-
-
- 0%
-
- 3 Star (0)
-
-
- 0%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (0)
-
-
- 0%
-
Prothane 7236
starstarstarstarstar" Review 2 Years Later "
Still holding up great and squeak free. Smooth ride and no rattles. 06 Chevy Silverado 4x4 1500 standard cab long bed.
verified_user Verified Buyer - Joren Davis - . Prothane 7236 - 5 out of 5starstarstarstarstar" Excellent customer service "
The parts worked great. My front end is much tighter now.
verified_user Verified Buyer - Danny Soto - . Prothane 7236 - 5 out of 5question_answer Customer Questions and Answers
- Question:
- Part number 7236 fits an 2006 Silverado 1500 4wd but not the Z71 according to the listing. Do you have a part number that fits the Z71?
- Answer:
- Unfortunately we do not offer the front control arm bushings for the 2006 Silverado 1500 4wd Z71.
- Question:
- Does this part fit a 2 wheel or 4 wheel drive GMC sierra 1500?
- Answer:
- Yes, part number 7236 will fit a 2 wheel or 4 wheel drive GMC Sierra 1500.
- Question:
- Does the 7236 set fit the Suburban 2500 with coil spring front suspension? It says
- Answer:
- Yes, Part Number 7236 will fit control arms on 2000 Suburban 2500 with the torsion bar or the coil spring.
- Question:
- Can I get the 7236 bushings but in neon green instead of red or black?
- Answer:
- Unfortunately we only offer the 7236 in red or black colors.
- Question:
- Is it possible to get measurements on these bushings?
- Answer:
- Part number 7236 is: 64349 large OD = 1.98in; 50.39 mm ID= .879 in; 22.33 mm Length = 3.69 in; 93.80 mm Lip = .278 in; 7.07 mm 64348 medium OD = 1.98 in; 50.47 mm ID= .829 in; 21.06 mm Length = 2.99 in; 76 mm Lip = .19 in; 4.92 mm 6434 47 small OD = 1.5 in; 38.84 mm ID= .8 in; 21.8 mm Length = 1.8 in; 45.17 mm Lip = .3 in; 7.66 mm 2 of Metal Sleeves - 60502 (7/8 X .120 X 3.000 5/8 ID inches) 2 of Metal Sleeves - 60629 (7/8 X .120 X 2.560 inches) ...see more