unarchive In The Box of bmk010 keyboard_arrow_down
- BMF55Z - Front Sway bar
- 27mm Solid Spring Steel Bar, 3 point adjustable
- 2 of 27MM Sway Bar Bushings With Brackets
- BMR84Z - Rear Sway bar
- 27mm Solid Spring Steel Bar, 3 point adjustable
- 2 of 27MM Sway Bar Bushings
- KLC139 - Front Sway Bar End Link Kit
- 2 of 15mm centre to centre length adjustment, 10mm Ball Joint ends
- KLC174 - Rear Sway Bar End Link Kit
- 2 of 25mm centre to centre length adjustment, 10mm Ball Joint ends
- KLL127 Alloy Lateral Locks
- 2 of Sway bar alloy lateral locks 27mm
add_shopping_cart Suggested Parts 2keyboard_arrow_down
Anti Lift Kit. Aligns suspension to resist roll in corners. Works great in conjunction with upgraded sway bars.
Whiteline provides grease to install these parts, but you can never have too much. Grab an extra 3-pack of grease so you can more liberally apply grease when installing.
lock Warranty Information keyboard_arrow_down
- WHITELINE bushing kits with part numbers from W00001 to WZZZZZ and KSK000 to KSKZZZ (Bushing Kits) are covered for their lifetime.
WHITELINE performance products include sway bar/ anti-roll-kits (excluding installation components) and bracing and alignment kits with part numbers from BAF000 to BZZZZZ, KCA000 to KCAZZZ, KSB000 to KSBZZZ, KLC000 to KLCZZZ and KDT000 to KDTZZZ (Performance Products) are covered for 3 years from the date of original installation.
Lancer Evo Complete Sway Bar Upgrade
This is Whiteline's Front and Rear Anti-Sway Bar Kit part number BMK010. This kit will fit 2007-2013 Mitsubishi Lancer Evolution X All Wheel Drive.
27mm Sway Bars for Front and Rear
Whiteline Sway bars BMF55Z and BMR84Z provide the front and rear sway bar for your vehicle. The adjustable ends allow for easy adjusting of your vehicle's balance giving you control over the tuning of your vehicle. With the three different points, you can stiffen up your suspension for use on the track, and soften up for your ride home. This awesome feature allows you to adjust the roll stiffness from track to the road instead of replacing the entire bar. When installing these 3 point sway bars, always start with the middle mount which is the advertised bar size. Once you are used to the change you can move to the inside hole to make the sway bar harder, or to the outside hole to make your bar softer.
27mm Sway Bar Bushings and Brackets
These performance sway bars will be mounted to your Evo using a pair of Whiteline's synthetic elastomer sway bar bushings with new zinc plated steel mounting brackets. To increase the grip of your sway bar, Whiteline uses their patented synthetic elastomer bushings to mount the bar to the frame. These bushings are resistant to chemicals, oils, and weathering and are designed to keep out contaminants while retaining grease.
Front and Rear Lateral Locks
Also included are Whiteline's aluminum lateral locks. These are mounted on the sway bar right next to the sway bar bushing mounts to prevent any shifting or sideways movements of the sway bar while cornering. These locks allow your sway bar to exert all of its energy in the suspension instead of the being wasted by flopping left and right in the mounts. An added benefit to using Whiteline's lateral locks is the prevention of your sway bar from contacting and damaging nearby chassis and steering components.
Front and Rear Heavy Duty Sway Bar Links
Whiteline part numbers KLC139 and KLC174 provide sway bar links for this vehicle. These links operate with a heavy duty steel ball joint end that rotates and adjusts to any angle needed. The steel ball joints are combined with lightweight aluminum bodies for increased strength over your factory mounts. These stronger drop links will help you eliminate sway bar preload during installation, improving your Evo's handling on corners. These adjustable links will also allow you to adjust for clearance issues if you have a lowered vehicle.
compare_arrows Compare with Similar Parts
($585.00) cheaper
- starstarstarstarstar1
- Rear Bar Only
- Bushing Material: Polyurethane