description Installation Instructions keyboard_arrow_down
- None Available
unarchive In The Box of 191116 keyboard_arrow_down
- 2 of Rear Sway Bar Bushings - 60217 (17mm)
- 2 of Sway Bar Brackets - 10050
- 1 of Super Grease - 19-1750-001
add_shopping_cart Suggested Parts 2keyboard_arrow_down
DST's lateral locks prevent sway bar movement and fits OE and aftermarket bars.
3 - 5ML High Performance Grease by Prothane
lock Warranty Information keyboard_arrow_down
- Lifetime Warranty. Prothane guarantees all Prothane Suspension Parts to be free of defects in materials and workmanship (not due to abuse, neglect or misapplication) for the total time the vehicle remains with the original purchaser of the product(s). Should the products fail to meet these conditions, Prothane will replace the product, free of charge. This excludes any and all related labor charges. The product must be shipped to Prothane (postage prepaid) along with a copy of the original receipt."
Prothane Sway Bar Bushings
A sway bar bushing plays a huge role in your suspension, so don't settle for rubber. Prothane Sway Bar bushings are made of polyurethane, much more durable material for suspension bushings than rubber. Polyurethane does not break down due to road grime, weather or oils the way the rubber can. Have the peace of mind knowing you have a long-lasting part on your sway bar with Prothane's sway bar bushings. Prothane's polyurethane sway bar bushings provide a secure grip on the sway bar and do not warp over time. With this snug grip, your vehicle will see a performance boost similar to installing a larger sway bar.
Faulty Rubber
A sway bar's function is to maintain the maximum amount of road contact during tires. The sway bar is held to the frame of the vehicle with a sway bar bushing. Original Equipment rubber can warp and/or crack, losing its grip on the bar. This causes your sway bar to lose its effectiveness. Just look at the old rubber sway bar bushing to the left. Imagine how good of a grip that thing could keep on a sway bar. Go with Polyurethane.
Use Prothane's Super Grease
The metal sway bar rotates inside the sway bar bushings, so be sure to use the supplied Prothane's Super Grease to lubricate the bushings during installation. Its super important that you lubricate each bushing well to prevent any squeaking. If you'd like some extra grease just in case, pick up an extra 3 pack.
Product Reviews for Rear Sway Bar Bushings - 17mm | Toyota Celica 00-05
- 5 Star (3)
-
-
- 100%
-
- 4 Star (0)
-
-
- 0%
-
- 3 Star (0)
-
-
- 0%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (0)
-
-
- 0%
-
Prothane 191116
starstarstarstarstar" Review 2 Years Later "
They are holding pretty good I should say after 2 years, this was never a replacement to my vehicle since my car was not equipped but I did modifications to the suspension and Im very pleased with the outcome, I highly recommend the product!!
verified_user Verified Buyer - Rafael Diaz - . Prothane 191116 - 5 out of 5starstarstarstarstar" Review 2 Years Later "
About 18 months after installed the parts, because of the normal wear and tear, the bushings were getting lose and making noise again. Editors Note: Prothane does not cover normal wear on their bushings. If the bushings are installed without greasing them it will cause them to wear more than normal. If you drive in extreme dusty conditions this will cause the wear.
verified_user Verified Buyer - Calvin Teng - . Prothane 191116 - 5 out of 5starstarstarstarstar" Excellent product "
Was not sure how I was going to get them spread far enough to go over the sway arm so I let them sit in some really hot water for a couple of minutes and everything went smooth. The wife is so happy that there is no longer a noise in the rear of her Toyota. And you know what they say, If momma is not happy, nobody happy.
verified_user Verified Buyer - John Rong - . Prothane 191116 - 5 out of 5
