Prothane 191505 Universal Sway Bar Bushings - 38mm (1.5 inch) - C

  • 191505 360image 1
  • 191505 Universal Sway Bar Bushings - 38mm (1.5 inch) - C
  • 191505 Universal Sway Bar Bushings - 38mm (1.5 inch) - C
  • 191505 Universal Sway Bar Bushings - 38mm (1.5 inch) - C
  • 191505 Universal Sway Bar Bushings - 38mm (1.5 inch) - C
  • 191505 Universal Sway Bar Bushings - 38mm (1.5 inch) - C
  • 191505 360image large 1

Universal Sway Bar Bushings - 38mm (1.5 inch) - C

Manufacturer: Prothane
Part Number: 191505

Color: (?)
Black
Red
Price: $20.97

check_box In Stock check_box Ships Immediately


  • 2 of Sway Bar Bushing - 38mm (1.5 inch)
  • 2 of Metal Brackets
  • 1 of Super Grease
Suggested part for 191505: 191750
191750 Super Grease 3 Pack
Prothane provides grease to install these parts, but you can never have too much. Grab an extra 3-pack of grease so you can more liberally apply grease when installing.

  • Lifetime Warranty. Prothane guarantees all Prothane Suspension Parts to be free of defects in materials and workmanship (not due to abuse, neglect or misapplication) for the total time the vehicle remains with the original purchaser of the product(s). Should the products fail to meet these conditions, Prothane will replace the product, free of charge. This excludes any and all related labor charges. The product must be shipped to Prothane (postage prepaid) along with a copy of the original receipt."
FitmentUniversal Sway Bar Bushings - 38mm (1.5 inch) - C 191505 fits these vehicles:

Prothane Universal Polyurethane Sway Bar Bushings

prothane 1211

A very important aspect of your suspension set up that you probably don't know about is the sway bar bushings. But if you have found yourself on this page, more than likely you know what they are now. The sway bar bushings hold your sway bar firmly in place, allowing the sway bar to function like it is intended to: keeping maximum tire contact to the ground while cornering. Cracked or rotted sway bar bushings lead to sloppy handling, an annoying clunking and uneven tire wear. Either way you look at it, not a good thing.

With the many different sizes of sway bars out there, Prothane has designed their line of Polyurethane Universal Sway Bar Bushings that are designed to fit any OE or aftermarket bar. These polyurethane bushings will grip the sway bar tightly, effectively giving your sway bar the performance of a larger sway bar. Installing these sway bar bushings will give your ride performance that wasn't possible even with brand new rubber bushings.

prothane sway bar bushings

If you have a pair of digital calibers, this process is pretty easy. Just measure your bar as close to the existing mount as possible. If you don't have any calipers, don't worry. There is another simple method that involves items you surely have around the house, a crescent wrench and a ruler. Simply tighten your wrench over the bar, and then measure the distance across the teeth of the wrench. Now that you have the diameter of your sway bar, you can confirm that this bushing is the correct size for your vehicle. If the diameter of the vehicle's sway bar is slightly larger than this bushings, that's okay, just do not go any larger than half a millimeter. Any larger and the bushing will not fit over the bar. It is also important not to select this sway bar bushing if it is larger than your sway bar size, as it would not grip the bar tightly. During installation be sure to grease these bushings good to prevent squeaking. The grease will stay in the channels on the inside of the sway bar bushing. If this bushing size does not match your sway bar diameter, go to the universal sway bar bushings page to find the proper size sway bar bushing.

Prothane 191505

Product Reviews for

5 Star (3)
75%
4 Star (1)
25%
3 Star (0)
0%
2 Star (0)
0%
1 Star (0)
0%
starstarstarstarstar

Prothane 191505

5 out of 5 based on 4 user reviews. Write a Review

S
verified_user

starstarstarstarstar_border" Quality part, good response when delayed in production, larger ear slots would help "

The mounting slots could not take a 1/2" through bolt and needed to be opened up. When you realize the energy needed to twist a 1.5" diameter solid steel torsion spring, you will want to keep the sway bar under control. Also, a two-piece shaft collar would be a good product to sell together to further maintain sway bar alignment. Editors Note: As with any universal part, it may need to be modified to make it fit. We do offer sway bar lateral locks. They bolt to the inside or outside of the sway bar bushing and go around the sway bar to keep it centered. Here is a link to the lateral lock: https://www.suspension.com/universal-sway-bar-lateral-locks.asp

verified_user Verified Buyer - scott Rogers - . Prothane 191505 - 4 out of 5
T
verified_user

starstarstarstarstar" Happy camper "

Shipping was ahead of schedule, price was competitive and fair, part was excellent quality. Restored handling on P30 pusher beyond expectations. Very happy camper.

verified_user Verified Buyer - TRUITT LIFSEY - . Prothane 191505 - 5 out of 5
L
verified_user

starstarstarstarstar" They worked well! "

I used these on my 1991 Overland motor home. with these being generic I did have to modify the plates these were mounted to since they are slightly larger than the OEM but they did work perfectly. My front sway bar is now very solid.

verified_user Verified Buyer - Lewis Smith - . Prothane 191505 - 5 out of 5
H
verified_user

starstarstarstarstar" Outstanding parts "

Parts were everything promised. Installation was quick and easy. Vehicle rides much better than ever before.

verified_user Verified Buyer - Howard K Jackson - . Prothane 191505 - 5 out of 5
Fitment for 191505

question_answer Customer Questions and Answers


Question:
What is the width of the bracket on part number 191505?
Answer:
Part number 191505 has a bracket width of 5-3/16.