Universal Flange Bushing | 19608

  • 19608 360image 1
  • 19608 Pivot Bushings - 1.5 OD - 9/16 ID - 3 Inch Long
  • 19608 Pivot Bushings - 1.5 OD - 9/16 ID - 3 Inch Long
  • 19608 Pivot Bushings - 1.5 OD - 9/16 ID - 3 Inch Long
  • 19608 Pivot Bushings - 1.5 OD - 9/16 ID - 3 Inch Long
  • 19608 Pivot Bushings - 1.5 OD - 9/16 ID - 3 Inch Long
  • 19608 360image large 1

Pivot Bushings - 1.5 OD - 9/16 ID - 3 Inch Long

Manufacturer: Prothane
Part Number: 19608

Color: (?)
Black
Red
Price: $14.97

check_box In Stock check_box Ships Immediately


  • 4 of Pivot Arm Bushings - 61233
  • 2 of Metal Sleeves - 60536 (3/4 X .083 X 3.000 9/16 MIN ID inch)
  • Lifetime Warranty. Prothane guarantees all Prothane Suspension Parts to be free of defects in materials and workmanship (not due to abuse, neglect or misapplication) for the total time the vehicle remains with the original purchaser of the product(s). Should the products fail to meet these conditions, Prothane will replace the product, free of charge. This excludes any and all related labor charges. The product must be shipped to Prothane (postage prepaid) along with a copy of the original receipt."
FitmentPivot Bushings - 1.5 OD - 9/16 ID - 3 Inch Long 19608 fits these vehicles:
Details

Universal Flange Bushing | 19608

Length Outer Diameter Length Fastener Bolt Diameter
63.50mm - 2-1/2 Inches 38.10mm - 1-1/2 Inches 76.20mm - 3 Inches 14.29mm - 9/16 Inch
Here is our complete list of universal bushings.

Prothane Universal Flange Type Bushings

If you are in the market for universal flange type polyurethane bushings, you've come to the right place. If you are a fabricator needing a bushing to finish your design, this is the place to be. Or, if you've just come from your vehicle page and are needing a universal bushing, you're where you need to be. Prothane's polyurethane is an excellent material for bushings. Resistant to chemical, oils, and weathering, poly bushings are far more durable than rubber and will outperform any bushing out there. If you are in the market for universal flange type polyurethane bushings, you've come to the right place. If you are a fabricator needing a bushing to finish your design, this is the place to be. Or, if you've just come from your vehicle page and are needing a universal bushing, you're where you need to be. So if you are having an issue finding a bushing for your specific needs, below is information to help you find a matching bushing from Prothane's selection of universal flange type bushings.

Prothane Universal Flange Bushings
Prothane Universal Flange Bushings

How-to obtain the measurements

To obtain the first measurement you'll need to measure the length of the tube where the bushing will actually go inside. So this won't give you the total length of the bushing we need, just the length of the part of the bushing that will be inside the tube. Next, you will need the outer diameter of the bushing. Now, most of you do not have the luxury of measuring the outer diameter of the bushing you will need. But don't worry, you can simply measure the inner diameter of the tube you are working with and that should give you the diameter of the bushing you need.

Now the Length, or Sleeve length, will be the total length of the bushing you need including the flange. So measure the total length of the inner sleeve that your OE bushing has. If you don't have the OE sleeve that's okay. Just make sure you have the proper Bolt size for the sleeve to match your OE bolt size. If you don't have the bolts either, you'll be making a trip to the hardware store to get a bolt that matches the sleeve that comes with your universal bushings. If you have each measurement matched, but the bushing is too long, you can cut them down to match your needs. Once you have these measurements you verify that this part will work for your application. If you find that this bushing will not match your measurements, you can go to our Universal Bushing Page to find a bushing that matches your measurements.

What Exactly Am I Getting?

This part number will come with four half bushings and two steel inner sleeves, making two complete bushings. These bushings will have a durometer of 95A so they will be strong enough for the toughest of applications. Your best bet is to find a bushing that is either the exact measurement or slightly bigger so it will fit snug. And by slightly bigger I do mean slightly, no more than half a millimeter. Any bigger and it would probably be too big for your tube. Using a split design, Prothane has made this universal for an easy install. Simply put one half of the bushing on one side, the other half on the other side, and slide your steel sleeve through.

Prothane Universal Flange Bushings
Prothane 19608

Product Reviews for Universal Flange Bushing | 19608

5 Star (12)
100%
4 Star (0)
0%
3 Star (0)
0%
2 Star (0)
0%
1 Star (0)
0%
starstarstarstarstar

Prothane 19608

5 out of 5 based on 12 user reviews. Write a Review

P
verified_user

starstarstarstarstar" Review 2 Years Later "

All is well thanks.

verified_user Verified Buyer - Paul Roberts - . Prothane 19608 - 5 out of 5
M
verified_user

starstarstarstarstar" company is very helpful and order was shipped promptly "

The part is not a perfect fit but was the closest I could find, anywhere!!! I have to figure a way to reduce the outside diameter of the bushing about 1/32 of an inch (eye of spring). My shackle bracket rusted through to separating. During replacement I was able to save the eye busing and only needed to replace the bolt. Your new bushing will be in my parts supply for when The eye bushing needs to be replaced,\nand a way to decrease the new busing diameter 1/32 or so is discovered. Or any of your suggestions??? Editors Note: Poly urethane bushings can be machined to get the dimensions you need to make the part to fit.

verified_user Verified Buyer - Mark Dow - . Prothane 19608 - 5 out of 5
S
verified_user

starstarstarstarstar" Good "

Great product and simple to use site for ordering will buy from again.

verified_user Verified Buyer - Stuart Penman - . Prothane 19608 - 5 out of 5
J
verified_user

starstarstarstarstar" Great Product "

Used these for a set of Fabricated Traction/Anti-Axle wrap Bars. Pictures located at:\nhttp://www.dodgetalk.com/forums/showthread.php?t=626161\nI will definitely be using this product again.

verified_user Verified Buyer - John Wesley Harkins - . Prothane 19608 - 5 out of 5

question_answer Customer Questions and Answers


Question:
For kit #19608, I just need to know the I D of the bushing, all other dimensions are correct.
Answer:
The Id of the inner sleeve is 9/16.