Universal Flange Bushing | 19611

  • 19611 360image 1
  • 19611 Pivot Bushings - OD 1.75 in, ID .756 in, Tube Length 2.5 in
  • 19611 Pivot Bushings - OD 1.75 in, ID .756 in, Tube Length 2.5 in
  • 19611 Pivot Bushings - OD 1.75 in, ID .756 in, Tube Length 2.5 in
  • 19611 Pivot Bushings - OD 1.75 in, ID .756 in, Tube Length 2.5 in
  • 19611 Pivot Bushings - OD 1.75 in, ID .756 in, Tube Length 2.5 in
  • 19611 360image large 1

Pivot Bushings - OD 1.75 in, ID .756 in, Tube Length 2.5 in

Manufacturer: Prothane
Part Number: 19611

Color: (?)
Black
Red
Price: $19.77

check_box In Stock check_box Ships Immediately


  • 2 of Metal Sleeves - 60502 (7/8 X .120 X 3.000 (5/8 ID) inches)
  • 4 of Spring Bushings - 60311 (1.75 OD inch)
  • Lifetime Warranty. Prothane guarantees all Prothane Suspension Parts to be free of defects in materials and workmanship (not due to abuse, neglect or misapplication) for the total time the vehicle remains with the original purchaser of the product(s). Should the products fail to meet these conditions, Prothane will replace the product, free of charge. This excludes any and all related labor charges. The product must be shipped to Prothane (postage prepaid) along with a copy of the original receipt."
FitmentPivot Bushings - OD 1.75 in, ID .756 in, Tube Length 2.5 in 19611 fits these vehicles:
Details

Universal Flange Bushing | 19611

1.75 Inch Outer Diameter 3 Inch Long 5/8 Inch Bolt

Prothane Universal Flange Type Bushings

If you are in the market for universal flange type polyurethane bushings, you've come to the right place. If you are a fabricator needing a bushing to finish your design, this is the place to be. Or, if you've just come from your vehicle page and are needing a universal bushing, you're where you need to be. Prothane's polyurethane is an excellent material for bushings. Resistant to chemical, oils, and weathering, poly bushings are far more durable than rubber and will outperform any bushing out there. If you are in the market for universal flange type polyurethane bushings, you've come to the right place. If you are a fabricator needing a bushing to finish your design, this is the place to be. Or, if you've just come from your vehicle page and are needing a universal bushing, you're where you need to be. So if you are having an issue finding a bushing for your specific needs, below is information to help you find a matching bushing from Prothane's selection of universal flange type bushings.

Prothane Universal Flange Bushings
Prothane Universal Flange Bushings

How-to obtain the measurements

To obtain the first measurement you'll need to measure the length of the tube where the bushing will actually go inside. So this won't give you the total length of the bushing we need, just the length of the part of the bushing that will be inside the tube. Next, you will need the outer diameter of the bushing. Now, most of you do not have the luxury of measuring the outer diameter of the bushing you will need. But don't worry, you can simply measure the inner diameter of the tube you are working with and that should give you the diameter of the bushing you need.

Now the Length, or Sleeve length, will be the total length of the bushing you need including the flange. So measure the total length of the inner sleeve that your OE bushing has. If you don't have the OE sleeve that's okay. Just make sure you have the proper Bolt size for the sleeve to match your OE bolt size. If you don't have the bolts either, you'll be making a trip to the hardware store to get a bolt that matches the sleeve that comes with your universal bushings. If you have each measurement matched, but the bushing is too long, you can cut them down to match your needs. Once you have these measurements you verify that this part will work for your application. If you find that this bushing will not match your measurements, you can go to our Universal Bushing Page to find a bushing that matches your measurements.

What Exactly Am I Getting?

This part number will come with four half bushings and two steel inner sleeves, making two complete bushings. These bushings will have a durometer of 95A so they will be strong enough for the toughest of applications. Your best bet is to find a bushing that is either the exact measurement or slightly bigger so it will fit snug. And by slightly bigger I do mean slightly, no more than half a millimeter. Any bigger and it would probably be too big for your tube. Using a split design, Prothane has made this universal for an easy install. Simply put one half of the bushing on one side, the other half on the other side, and slide your steel sleeve through.

Prothane Universal Flange Bushings
Prothane 19611

Product Reviews for Universal Flange Bushing | 19611

5 Star (5)
100%
4 Star (0)
0%
3 Star (0)
0%
2 Star (0)
0%
1 Star (0)
0%
starstarstarstarstar

Prothane 19611

5 out of 5 based on 5 user reviews. Write a Review

L
verified_user

starstarstarstarstar" Review 2 Years Later "

Havent yet finished my project car. But the bushings have held up reasonably well.

verified_user Verified Buyer - - . Prothane 19611 - 5 out of 5
R
verified_user

starstarstarstarstar" Review 2 Years Later "

The bushings work fine and will continue to purchase from you.

verified_user Verified Buyer - - . Prothane 19611 - 5 out of 5
J
verified_user

starstarstarstarstar" Perfect fit "

The original leaf spring bushings kit for my 94 f150 did not fit. After not being able to locate the right bushing at the parts store or online searches, I contacted suspension.com. They directed me to these. They fit perfectly

verified_user Verified Buyer - - . Prothane 19611 - 5 out of 5
J
verified_user

starstarstarstarstar" Review 2 Years Later "

Bought this to repair the spring on the driver side of my 96 ford bronco. They were not long enough so it took two kits. To make them work I cut the barrel on the extra bushings and insert it between the halves. It has done great and kept me from buying new springs. The shackle bushings are going bad on the other side so Im getting ready to buy another set. Im very well pleased just wish that they made a bushing long enough and I didnt have to take two to make one.

verified_user Verified Buyer - - . Prothane 19611 - 5 out of 5

question_answer Customer Questions and Answers


Question:
What is the thickness of the flanges of part number 19611?
Answer:
Part number 19611 has a flange thickness of 1/4 inches.

Question:
Will part number 19611 work with a .54 inch bolt?
Answer:
No, part number 19611 works with a .62 inch bolt.