Universal Flange Bushing | 19612

  • 19612 360image 1
  • 19612 Pivot Bushings - 1-1/8 inch OD - 1.75 inch Length - 5/8 inch Bolt
  • 19612 Pivot Bushings - 1-1/8 inch OD - 1.75 inch Length - 5/8 inch Bolt
  • 19612 Pivot Bushings - 1-1/8 inch OD - 1.75 inch Length - 5/8 inch Bolt
  • 19612 Pivot Bushings - 1-1/8 inch OD - 1.75 inch Length - 5/8 inch Bolt
  • 19612 Pivot Bushings - 1-1/8 inch OD - 1.75 inch Length - 5/8 inch Bolt
  • 19612 360image large 1

Pivot Bushings - 1-1/8 inch OD - 1.75 inch Length - 5/8 inch Bolt

Manufacturer: Prothane
Part Number: 19612

Color: (?)
Black
Red
Price: $19.77

check_box In Stock check_box Ships Immediately


  • 2 of Metal Sleeves - 60648 (13/16 X .065 X 1.73 inches)
  • 4 of Kugel Multi Adjuster Bushings - 61184
  • Lifetime Warranty. Prothane guarantees all Prothane Suspension Parts to be free of defects in materials and workmanship (not due to abuse, neglect or misapplication) for the total time the vehicle remains with the original purchaser of the product(s). Should the products fail to meet these conditions, Prothane will replace the product, free of charge. This excludes any and all related labor charges. The product must be shipped to Prothane (postage prepaid) along with a copy of the original receipt."
FitmentPivot Bushings - 1-1/8 inch OD - 1.75 inch Length - 5/8 inch Bolt 19612 fits these vehicles:

Universal Flange Bushing | 19612

Prothane Universal Flange Type Bushings

If you are in the market for universal flange type polyurethane bushings, you've come to the right place. If you are a fabricator needing a bushing to finish your design, this is the place to be. Or, if you've just come from your vehicle page and are needing a universal bushing, you're where you need to be. Prothane's polyurethane is an excellent material for bushings. Resistant to chemical, oils, and weathering, poly bushings are far more durable than rubber and will outperform any bushing out there. If you are in the market for universal flange type polyurethane bushings, you've come to the right place. If you are a fabricator needing a bushing to finish your design, this is the place to be. Or, if you've just come from your vehicle page and are needing a universal bushing, you're where you need to be. So if you are having an issue finding a bushing for your specific needs, below is information to help you find a matching bushing from Prothane's selection of universal flange type bushings.

Prothane Universal Flange Bushings
Prothane Universal Flange Bushings

How-to obtain the measurements

To obtain the first measurement you'll need to measure the length of the tube where the bushing will actually go inside. So this won't give you the total length of the bushing we need, just the length of the part of the bushing that will be inside the tube. Next, you will need the outer diameter of the bushing. Now, most of you do not have the luxury of measuring the outer diameter of the bushing you will need. But don't worry, you can simply measure the inner diameter of the tube you are working with and that should give you the diameter of the bushing you need.

Now the Length, or Sleeve length, will be the total length of the bushing you need including the flange. So measure the total length of the inner sleeve that your OE bushing has. If you don't have the OE sleeve that's okay. Just make sure you have the proper Bolt size for the sleeve to match your OE bolt size. If you don't have the bolts either, you'll be making a trip to the hardware store to get a bolt that matches the sleeve that comes with your universal bushings. If you have each measurement matched, but the bushing is too long, you can cut them down to match your needs. Once you have these measurements you verify that this part will work for your application. If you find that this bushing will not match your measurements, you can go to our Universal Bushing Page to find a bushing that matches your measurements.

What Exactly Am I Getting?

This part number will come with four half bushings and two steel inner sleeves, making two complete bushings. These bushings will have a durometer of 95A so they will be strong enough for the toughest of applications. Your best bet is to find a bushing that is either the exact measurement or slightly bigger so it will fit snug. And by slightly bigger I do mean slightly, no more than half a millimeter. Any bigger and it would probably be too big for your tube. Using a split design, Prothane has made this universal for an easy install. Simply put one half of the bushing on one side, the other half on the other side, and slide your steel sleeve through.

Prothane Universal Flange Bushings
Prothane 19612

Product Reviews for Universal Flange Bushing | 19612

5 Star (8)
89%
4 Star (1)
11%
3 Star (0)
0%
2 Star (0)
0%
1 Star (0)
0%
starstarstarstarstar

Prothane 19612

5 out of 5 based on 9 user reviews. Write a Review

J
verified_user

starstarstarstarstar

My suspension was a unknown manufacturer called the tech support at suspension.com and he explained how to take measurements and I was able to explain what I needed.He then sent the exact bushing I needed. I recommend suspension products there great thanks Joseph Ferrara

verified_user Verified Buyer - Joseph Ferrara - . Prothane 19612 - 5 out of 5
L
verified_user

starstarstarstarstar_border" Nice part "

Had rubber bushings. Replaced with these. Big difference!!

verified_user Verified Buyer - larry cates - . Prothane 19612 - 4 out of 5
V
verified_user

starstarstarstarstar" A well fitting product. "

Good product. No problems. I would order from you again.

verified_user Verified Buyer - Vance Cline - . Prothane 19612 - 5 out of 5
D
verified_user

starstarstarstarstar" what i needed "

On the money.

verified_user Verified Buyer - david horton - . Prothane 19612 - 5 out of 5

question_answer Customer Questions and Answers


Question:
Will the 19612 bushings crush when installed where the sleeve does not reach?
Answer:
No, part number 19612 was designed for the sleeve to be shorter than the bushing.

Question:
What is the ID of the bushing in 19612? Not the id of the sleeve.
Answer:
The bushing in the 19612 kit will have a inner diameter of .82