4204 | Dodge D Series 3800-4000 LB Front Control Arm Bushings

  • 4204 Front Control Arm Bushings - 3800-4000 lb
  • 4204 Front Control Arm Bushings - 3800-4000 lb

Front Control Arm Bushings - 3800-4000 lb

Manufacturer: Prothane
Part Number: 4204

Color: (?)

Special Order Terms: (?)
Accept Terms (4-8 weeks)
Price: $32.98

Special Order

  • 2 of Front Control Arm Bushings, Large - 64036
  • 2 of Metal Sleeves - 60631 (1 X .120 X 3.375 inches)
  • 4 of Front Control Arm Bushings, Small - 64034
  • 1 of Super Grease - 19-1750-001
  • Lifetime Warranty. Prothane guarantees all Prothane Suspension Parts to be free of defects in materials and workmanship (not due to abuse, neglect or misapplication) for the total time the vehicle remains with the original purchaser of the product(s). Should the products fail to meet these conditions, Prothane will replace the product, free of charge. This excludes any and all related labor charges. The product must be shipped to Prothane (postage prepaid) along with a copy of the original receipt."
Cross Reference from 4204 to 5.3106
Energy Suspension 5.3106
Price: $51.86
Warranty: 7 Year Warranty

FitmentFront Control Arm Bushings - 3800-4000 lb 4204 fits these vehicles:

4204 | Dodge D Series 3800-4000 LB Front Control Arm Bushings

One Kit Covers Left and Right Side Up to 3800 to 4000 lb. Axle w/ Heavy Duty Package
  • One Set Will Cover the Left and Right Side

Prothane Control Arm Bushings

A control arm bushing plays a vital role in a suspension. Replace those faulty O.E. rubber bushings with Prothane's polyurethane control arm bushings. These polyurethane bushings provide the longevity and performance needed to maximize a suspension's efficiency.

Prothane's polyurethane is a firmer bushing than the O.E. Not only does this increase the longevity of the bushing but gives the suspension a boost in handling performance. With a firmer bushing, there will be a slight increase in NVH (noise, vibration, and harshness), but most drivers prefer the boost in performance in spite of that.

Prothane Control Arm Bushings Box
Worn Rubber Bushing

The Faulty O.E.

As your suspension travels, a rubber control arm bushing is repeatedly stretching and flexing. After a while, the center sleeve begins to sag and your suspension alignment is throw out of whack. The sagging will go on until the rubber fails completely.

Use Prothane's Super Grease

Control arm bushings are a high stress part, so be sure to use the supplied Prothane's Super Grease to lubricate the bushings during installation. Its super important that you lubricate each bushing well to prevent any squeaking. If you'd like some extra grease just in case, pick up an extra 3 pack.

Prothane Control Arm Grease
Prothane 4204

Product Reviews for 4204 | Dodge D Series 3800-4000 LB Front Control Arm Bushings

5 Star (1)
4 Star (0)
3 Star (0)
2 Star (0)
1 Star (0)

Prothane 4204

5 out of 5 based on 1 user reviews. Write a Review


starstarstarstarstar" Long lasting and good firm feeling "

These bushings are a great upgrade from stock, they last much longer and can handle more pressure and weight than stock bushings. The easiest way to remove the old original bushings from the metal shell is to heat the outer shell with a acet. & oxy. torch or map gas torch. Watching carefully as the rubber bushing begins to push itself out of the metal shell it sometimes comes out in a hurry, so dont stand over it. Then just cool and clean the inside of the shell with a wire brush. Lube and push the new polyurethane bushings in with a vise or press. These are very good bushings and are highly recommended by me.

verified_user Verified Buyer - - . Prothane 4204 - 5 out of 5

compare_arrows Compare with Similar Parts

This Part
4204 compare
Energy Suspension
Energy Suspension compare
($18.88) more expensive