unarchive In The Box of 61166 keyboard_arrow_down
- 1 of Super Grease - 19-1750-001
- 4 of Metal Sleeves - 60680 (3/4 X .134 X 1.950 inches)
- 2 of Front Sway Bar Bushings - 62545 (32mm)
- 4 of Front End Link Bushings - 63080
- 4 of Front End Link Bushings - 63081
- 4 of Metal Washers - 1159 (1/2 X 2.000 X 0.095 inches)
add_shopping_cart Suggested Parts 2keyboard_arrow_down
lock Warranty Information keyboard_arrow_down
- Lifetime Warranty. Prothane guarantees all Prothane Suspension Parts to be free of defects in materials and workmanship (not due to abuse, neglect or misapplication) for the total time the vehicle remains with the original purchaser of the product(s). Should the products fail to meet these conditions, Prothane will replace the product, free of charge. This excludes any and all related labor charges. The product must be shipped to Prothane (postage prepaid) along with a copy of the original receipt."
shuffle Cross References 1keyboard_arrow_down
Prothane Sway Bar Bushings
A sway bar bushing plays a huge role in your suspension, so don't settle for rubber. Prothane Sway Bar bushings are made of polyurethane, much more durable material for suspension bushings than rubber. Polyurethane does not break down due to road grime, weather or oils the way the rubber can. Have the peace of mind knowing you have a long-lasting part on your sway bar with Prothane's sway bar bushings. Prothane's polyurethane sway bar bushings provide a secure grip on the sway bar and do not warp over time. With this snug grip, your vehicle will see a performance boost similar to installing a larger sway bar.
A sway bar's function is to maintain the maximum amount of road contact during tires. The sway bar is held to the frame of the vehicle with a sway bar bushing. Original Equipment rubber can warp and/or crack, losing its grip on the bar. This causes your sway bar to lose its effectiveness. Just look at the old rubber sway bar bushing to the left. Imagine how good of a grip that thing could keep on a sway bar. Go with Polyurethane.
Use Prothane's Super Grease
The metal sway bar rotates inside the sway bar bushings, so be sure to use the supplied Prothane's Super Grease to lubricate the bushings during installation. Its super important that you lubricate each bushing well to prevent any squeaking. If you'd like some extra grease just in case, pick up an extra 3 pack.
Product Reviews for 61166 | Front Sway Bar and Endlink Bushings - 32 mm | Ford F250
- 5 Star (7)
- 4 Star (0)
- 3 Star (0)
- 2 Star (1)
- 1 Star (0)
starstarstarstarstar" Review 1 Year Later "
Still holding steady.verified_user Verified Buyer - Paul Consigny - . Prothane 61166 - 5 out of 5
starstarstarstarstar" Still working the way they are supposed to. "
bought these because the old ones were almost completely gone, the front sway bar would clunk loudly over any large bumps. The new bushings fixed the problem and are still holding up fine.verified_user Verified Buyer - Zacheriah Brown - . Prothane 61166 - 5 out of 5
starstarstar_borderstar_borderstar_border" not good "
Frame bushings fit OK. End link bushings are not replaceable. Had to buy new links with bushings installed.verified_user Verified Buyer - Lee Ferguson 500hpdodge - . Prothane 61166 - 2 out of 5
starstarstarstarstar" Excellent Product "
This product arrived very quickly and after laying out all the parts the task was started and dis-assembly complete ready for replacement in very little time. Pressing the old bushings out took over 30 tons pressure but finally they popped loose and with only a little cleanup every thing was re-assembled and back on the vehicle almost as quickly as it came apart. The best part other than maybe the great price is the renewal of the front end since the bushings were all worn and the links felt like a hammer pounding on the frame. Thanks for a great product at a great price - less than half the price of only one factory end link and all the anti-sway bar wear points are new again with superior materials!verified_user Verified Buyer - Robert Chan - . Prothane 61166 - 5 out of 5