unarchive In The Box of 7315 keyboard_arrow_down
- 2 of Super Grease - 19-1750-001
- 4 of Metal Sleeves - 60580 (7/8 X .120 X 1.690 inches)
- 4 of Metal Sleeves - 60707 (3/4 X .120 X 1.700 inches)
- 8 of Rear Control Arm Bushings - 64118
- 8 of Rear Control Arm Bushings - 64119
lock Warranty Information keyboard_arrow_down
- Lifetime Warranty. Prothane guarantees all Prothane Suspension Parts to be free of defects in materials and workmanship (not due to abuse, neglect or misapplication) for the total time the vehicle remains with the original purchaser of the product(s). Should the products fail to meet these conditions, Prothane will replace the product, free of charge. This excludes any and all related labor charges. The product must be shipped to Prothane (postage prepaid) along with a copy of the original receipt."
shuffle Cross References 1keyboard_arrow_down
7315 | Rear Control Arm Bushing Replacement | Corvette 84-96
Prothane Control Arm Bushings
A control arm bushing plays a vital role in a suspension. Replace those faulty O.E. rubber bushings with Prothane's polyurethane control arm bushings. These polyurethane bushings provide the longevity and performance needed to maximize a suspension's efficiency.
Prothane's polyurethane is a firmer bushing than the O.E. Not only does this increase the longevity of the bushing but gives the suspension a boost in handling performance. With a firmer bushing, there will be a slight increase in NVH (noise, vibration, and harshness), but most drivers prefer the boost in performance in spite of that.
The Faulty O.E.
As your suspension travels, a rubber control arm bushing is repeatedly stretching and flexing. After a while, the center sleeve begins to sag and your suspension alignment is throw out of whack. The sagging will go on until the rubber fails completely.
Use Prothane's Super Grease
Control arm bushings are a high stress part, so be sure to use the supplied Prothane's Super Grease to lubricate the bushings during installation. Its super important that you lubricate each bushing well to prevent any squeaking. If you'd like some extra grease just in case, pick up an extra 3 pack.
Product Reviews for 7315 | Rear Control Arm Bushing Replacement | Corvette 84-96
- 5 Star (5)
- 4 Star (0)
- 3 Star (0)
- 2 Star (0)
- 1 Star (0)
starstarstarstarstar" Very satisfied "
I was very impressed with this product, not only was it a perfect fit it was very easy to install. I was also very pleased that this product was even available, seeing that the dealer has discontinued this item.verified_user Verified Buyer - Jesse Ledesma / jess-ledes - . Prothane 7315 - 5 out of 5
starstarstarstarstar" Excellente "
Easy to install.. excellentverified_user Verified Buyer - Belmarie Reyes - . Prothane 7315 - 5 out of 5
starstarstarstarstar" Very Good "
As in my Sway bar End link review these upper and lower Control arm bushings went in easily with my shop press. The packets of lube are Not enough to lubricate everything. I liberally coated everything in Marine Grease. My original low mileage factory bushings wereed and the control arms were binding. When I put the rear of the car on jack stands I was amazed to see very little droop of the rear wheels. I had difficulty pivoting the arms they were binding so badly. With the polyurethane installed the suspension works again. The ride is a bit harsher over bad bumps, yet smoother on minor bumps and road imperfections than before. Overall I am happy,I just hope they last another 15 years!!verified_user Verified Buyer - Gary G. - . Prothane 7315 - 5 out of 5
starstarstarstarstar" EXCELLENT "
These parts could be installed perfectly.verified_user Verified Buyer - Paul Stuleber - . Prothane 7315 - 5 out of 5