Outer Tie Rod Dust Boots - Jeep Wrangler TJ - 191712

  • 191712 360image 1
  • 191712 Tie Rod Dust Boots
  • 191712 Tie Rod Dust Boots
  • 191712 Tie Rod Dust Boots
  • 191712 Tie Rod Dust Boots
  • 191712 Tie Rod Dust Boots
  • 191712 360image large 1

Tie Rod Dust Boots

Manufacturer: Prothane
Part Number: 191712

Color: (?)
Price: $4.17

check_box In Stock check_box Ships Immediately

  • Lifetime Warranty. Prothane guarantees all Prothane Suspension Parts to be free of defects in materials and workmanship (not due to abuse, neglect or misapplication) for the total time the vehicle remains with the original purchaser of the product(s). Should the products fail to meet these conditions, Prothane will replace the product, free of charge. This excludes any and all related labor charges. The product must be shipped to Prothane (postage prepaid) along with a copy of the original receipt."
Cross Reference from 191712 to 9.13101
Energy Suspension 9.13101
Price: $4.13
Warranty: 2 Year Warranty

FitmentTie Rod Dust Boots 191712 fits these vehicles:

Outer Tie Rod Dust Boots - Jeep Wrangler TJ - 191712

Pin Opening Diameter Base Opening Diameter Height of Boot Piece Number
(0.59 inch)
(1.375 inch)
(0.965 inch)
Here is our complete list of universal dust boots.

Prothane Polyurethane Universal Dust Boots

Prothane Dust Boots

Many of you are finding out that the rubber boot on your ball joint or tie rod has rotted away or has split. These boots are extremely important for the suspension of your vehicle. Fortunately, Prothane makes Universal Dust boots that will fit most vehicles. These dust boots are made of polyurethane and are far more durable than rubber. This will seal your boot to retain the grease in the joint, as well as protecting the joint from dirt, sand, water and snow.

How-to obtain measurements

In order to select the proper boot, you will first need to grab a few measurements. The best way to do this is with a set of digital calipers. You will need to measure the diameter of the base where the boot will sit, the diameter of the shaft (also called the Pin Opening Diameter) and the height of the boot. Once you have gotten to your tie rod end measure these three spots. Be sure to be as exact as possible and to write down your measurements. If you have any trouble getting these measurements, give our customer service team at DST a call. It is important to note that you do not want to choose a boot that is bigger than your measurements. You want to choose a boot that is just slightly smaller than the measurements you obtained. The elasticity of the polyurethane will allow the hole to stretch and grip the joint tightly. If you choose a boot that is too large there will be a gap which lets in debris.

Prothane Dust Boots
Prothane Dust Boots

After Measureing Your Dust Boots

Now that you have these measurements, you can verify that this is the boot that you need. If you find that your measurements do not match this boot, go to our Universal Dust Boot page to match a part to your measurements.

Prothane 191712

Product Reviews for Outer Tie Rod Dust Boots - Jeep Wrangler TJ - 191712

5 Star (34)
4 Star (0)
3 Star (0)
2 Star (0)
1 Star (0)

Prothane 191712

5 out of 5 based on 34 user reviews. Write a Review


starstarstarstarstar" Review 1 Year Later "

An absolute must have for any classic car restorations. High quality product that produces a better quality ride for a fraction of the cost of stock replacement bushings for pre-1979 era vehicles.

verified_user Verified Buyer - Ryan S. Parsons - . Prothane 191712 - 5 out of 5

starstarstarstarstar" Review 2 Years Later "

Parts were installed in an antique with very limited mileage but have held up with no cracking to date.

verified_user Verified Buyer - Edward W Morrison - . Prothane 191712 - 5 out of 5

starstarstarstarstar" Looks good "

Worked out perfectly. Thanks Suspension.com

verified_user Verified Buyer - Dirk Specht - . Prothane 191712 - 5 out of 5

starstarstarstarstar" Review 2 Years Later "

Parts are holding up great doing the job like suppose to. Easy direct fit, all pluses.

verified_user Verified Buyer - philip d pauff - . Prothane 191712 - 5 out of 5

Fitment for 191712

compare_arrows Compare with Similar Parts

This Part
191712 compare
Energy Suspension
Energy Suspension compare
($0.04) cheaper

question_answer Customer Questions and Answers

Will the 191712 boot fit or my 05 Chevrolet Trailblazer ball joint dust boots?
The 191712 is an universal boot that does not have a guaranteed fitment. If you Trailblazer ball joint matches to the 191712 specs this boot may work for you though.

There seems to be two different sets of measurements for 191712?
There is the dimensions in inches and in mm. There is the pin opening, base opening and height.