Universal Tie Rod End and Ball Joint Boots
Prothane's Polyurethane Dust Boots are a far more reliable option than the OE rubber dust boots on your vehicle. These dust boots seal in grease while protecting your tie rod ends or ball joints from sand, water and other debris. Polyurethane is much more durable than rubber, and these dust boots should last the lifetime of your vehicle. If you're restoring an older vehicle with damaged dust boots, or needing a replacement for a aftermarket ball joint boot, then it could be difficult to find replacements, but with the chart below you can find the exact dimensions you need!
* The universal dust boots listed on this page are all from larger kits. Prothane doesn't sell these pieces individually, but we have measured them for you and indicated the kits that they can be found in.
How To Measure for Dust Boots
Dust Boots by Size
The diameter of the pin opening, point "A", should be measured at the point where the top of the dust boot will sit. It is important to select a size that is slightly smaller than the measurement you obtained. The elasticity of the polyurethane will allow the dust boot to stretch and provide a tight fit on the stud. The diameter of the base, point "B", should be measured where the bottom of the dust boot will sit on the base. Again, it is important to choose a dust boot that is slightly smaller than your measurement. If you choose a dust boot that is even slightly to large, a gap will be created that will allow the grease to leak out and dust to sneak in.
These dust boots are Made in the USA and backed by Prothane's Lifetime Warranty.
Image | Pin Opening Diameter | Base Opening Diameter | Height of Boot | Piece Number | Included in Sets BOLD Indicates this kit includes only that piece. |
---|---|---|---|---|---|
INCH: 0.472 MM: 11.99 |
INCH: 1.20 MM: 30.48 |
INCH: 0.965 MM: 24.51 |
60512 | 191711 - Qty 2 | |
INCH: 0.59 MM: 14.99 |
INCH: 1.375 MM: 34.93 |
INCH: 0.950 MM: 24.13 |
60513 | 191712 - Qty 2 | |
INCH: 0.55 MM: 13.97 |
INCH: 1.438 MM: 36.53 |
INCH: 0.965 MM: 24.51 |
60514 | 191713 - Qty 2 | |
INCH: 0.65 MM: 16.51 |
INCH: 1.625 MM: 41.28 |
INCH: 0.965 MM: 24.51 |
60515 | 191714 - Qty 2 | |
INCH: 0.65 MM: 16.51 |
INCH: 1.6375 MM: 41.59 |
INCH: 1.15 MM: 29.21 |
60516 | 191715 - Qty 2 | |
INCH: 0.55 MM: 13.97 |
INCH: 1.435 MM: 36.45 |
INCH: 1.35 MM: 34.29 |
60517 | 191715 - Qty 2 | |
INCH: 0.91 MM: 23.11 |
INCH: 2.15 MM: 54.61 |
INCH: 1.10 MM: 27.94 |
60518 | 191716 - Qty 2 | |
INCH: 0.85 MM: 21.59 |
INCH: 1.75 MM: 44.45 |
INCH: 2.225 MM: 56.52 |
60519 | 41701 - Qty 2 | |
INCH: 0.50 MM: 12.70 |
INCH: 1.75 MM: 44.45 |
INCH: 2.225 MM: 56.52 |
60520 | 191725 - Qty 2 | |
INCH: 0.75 MM: 19.05 |
INCH: 1.75 MM: 44.45 |
INCH: 1.10 MM: 27.94 |
60690 | 191723 - Qty 2 | |
INCH: 0.775 MM: 19.69 |
INCH: 1.62 MM: 41.15 |
INCH: 1.00 MM: 25.40 |
60691 | 191724 - Qty 2 | |
INCH: 0.472 MM: 11.99 |
INCH: 1.20 MM: 30.48 |
INCH: 0.965 MM: 21.51 |
60512 | 191811 - Qty 100 | |
INCH: 0.59 MM: 14.99 |
INCH: 1.375 MM: 34.93 |
INCH: 0.950 MM: 24.13 |
60513 | 191812 - Qty 100 | |
INCH: 0.56 MM: 14.22 |
INCH: 1.438 MM: 36.53 |
INCH: 0.550 MM: 13.97 |
60514 | 191813 - Qty 100 | |
INCH: 0.66 MM: 16.76 |
INCH: 1.625 MM: 41.28 |
INCH: 0.650 MM: 16.51 |
60515 | 191814 - Qty 100 | |
INCH: 0.644 MM: 16.36 |
INCH: 1.653 MM: 41.99 |
INCH: 0.468 MM: 11.89 |
69224 | 191819 - Qty 2 | |
INCH: 0.71 MM: 18.03 |
INCH: 1.95 MM: 49.53 |
INCH: 0.92 MM: 23.37 |
N/A | 191820 - Qty 2 | |
INCH: 0.80 MM: 20.32 |
INCH: 1.82 MM: 46.23 |
INCH: 1.50 MM: 38.10 |
71006 | 191820 - Qty 2 | |
INCH: 0.650 MM: 16.51 |
INCH: 0.805 MM: 20.45 |
INCH: 0.560 MM: 14.22 |
60461 | 191821 - Qty 2 | |
INCH: 0.472 MM: 11.99 |
INCH: 1.20 MM: 30.48 |
INCH: 0.965 MM: 24.51 |
60512 | 191822 - Qty 2 | |
INCH: 0.59 MM: 14.99 |
INCH: 1.375 MM: 34.93 |
INCH: 0.950 MM: 24.13 |
60513 | 191823 - Qty 2 | |
INCH: 0.550 MM: 13.97 |
INCH: 1.438 MM: 36.55 |
INCH: 0.950 MM: 24.13 |
60514 | 191824 - Qty 2 | |
INCH: 0.650 MM: 16.51 |
INCH: 1.625 MM: 41.28 |
INCH: 0.950 MM: 24.13 |
60515 | 191825 - Qty 2 | |
INCH: 0.650 MM: 16.51 |
INCH: 1.625 MM: 41.28 |
INCH: 0.950 MM: 29.21 |
60516 | 191826 - Qty 2 | |
INCH: 0.550 MM: 13.97 |
INCH: 1.438 MM: 36.53 |
INCH: 1.340 MM: 34.04 |
60517 | 191827 - Qty 2 | |
INCH: 0.910 MM: 23.11 |
INCH: 2.130 MM: 54.10 |
INCH: 1.100 MM: 27.94 |
60518 | 191828 - Qty 2 | |
INCH: 0.845 MM: 21.46 |
INCH: 1.690 MM: 42.93 |
INCH: 2.100 MM: 53.34 |
60519 | 191829 - Qty 2 | |
INCH: 0.500 MM: 12.70 |
INCH: 1.420 MM: 36.07 |
INCH: 0.720 MM: 18.29 |
60520 | 191830 - Qty 2 | |
INCH: 0.750 MM: 19.05 |
INCH: 1.700 MM: 43.18 |
INCH: 1.100 MM: 27.94 |
60690 | 191831 - Qty 2 | |
INCH: 0.770 MM: 19.56 |
INCH: 1.600 MM: 40.64 |
INCH: 1.000 MM: 25.40 |
60691 | 191832 - Qty 2 | |
INCH: 0.730 MM: 18.54 |
INCH: 1.625 MM: 41.28 |
INCH: 1.095 MM: 27.81 |
69223 | 191833 - Qty 2 | |
INCH: 0.640 MM: 16.26 |
INCH: 1.625 MM: 41.28 |
INCH: 1.445 MM: 36.70 |
69224 | 191834 - Qty 2 | |
INCH: 0.800 MM: 20.32 |
INCH: 1.800 MM: 45.72 |
INCH: 1.450 MM: 36.83 |
71006 | 191835 - Qty 2 | |
INCH: 0.700 MM: 17.78 |
INCH: 1.900 MM: 48.26 |
INCH: 1.900 MM: 48.26 |
71007 | 191836 - Qty 2 |